Directory of Listed Products

BUILDING PRODUCTS LISTING PROGRAM

Class:

Roof Coverings

Customer:

DaVinci Roofscapes, LLC

Location:

13890 West 101st Street, Lenexa , KS 66215

Listing No.:

B1050

Project No.:

B1050-1, Edition 2

Effective Date:

June 31, 2012

Last Revised:

April 29, 2014

Expires:

January 1, 2020

Standards:

ASTM E108 - “Standard Test Methods for Fire Tests of Roof Coverings”.

UL 790 – “Standard Test Methods for Fire Tests of Roof Coverings”

UL 2218 – “Impact Resistance of Prepared Roof Covering Materials”.

Follow up inspections are conducted by QAI under the requirements outlined

in ICC-ES AC07 “Acceptance Criteria for Special Roofing Systems”.

Product:

DaVinci Shake, DaVinci Slate, DaVinci Bellaforte Shake, DaVinci Bellaforte Slate, DaVinci Valoré Shake, DaVinci Valoré Slate Polymeric Roof Covering Products

Website:

www.davinciroofscapes.com

Markings:

Listed products are identified with a pallet label bearing the following information: Address of manufacture, Product Name, Date of Manufacture, QAI logo with the “us” identifier, ICC-ES logo, ICC-ES Evaluation Report

Number, and the wording “ASTM E108” or “UL 790”.

Models:

Assembly 1:

Class C Roofing Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

Approved Underlayment^1,2

DaVinci Shake³

DaVinci Slate³

DaVinci Bellaforte Shake³

DaVinci Bellaforte Slate³

DaVinci Valoré Shake³

DaVinci Valoré Slate³

Assembly 2:

Class A Re-Roofing Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

Approved Underlayment^1,2

Approved Class A Asphalt Shingle¹ Covered with:

DaVinci Bellaforte Shake³ DaVinci Bellaforte Slate³

Assembly 3:

Class A Roofing Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

1 Layer 30 lbs ASTM D226 Felt Over Substrate²

1 Layer Min. 0.1 inch Thickness 0.66 lbs/ft2 ASTM D3909 Cap Stock over Felt²

DaVinci Bellaforte Shake³ DaVinci Bellaforte Slate³

Assembly 4:

Class A Roofing Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

1 Layer of Fontana VulcaSeal G40^1,2 Mechanically Fastened

DaVinci Shake³

DaVinci Valoré Shake³

Assembly 5:

Class A Roofing Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

1 Layer 30 lbs ASTM D226 Felt²

DaVinci Slate³

DaVinci Valoré Slate³

Assembly 6:

Class A Roofing Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

1 Layer ELK-VersaShield^™1,2

DaVinci Shake³

DaVinci Slate³

DaVinci Valoré Shake³

DaVinci Valoré Slate³

Assembly 7:

Impact Resistant (Class 4) Applications: Unlimited Slope

SHEATHING

UNDERLAYMENT(s)

ROOF COVERING(s)

Minimum ½’’ Exposure 1

Plywood

Unrestricted

DaVinci Shake³

DaVinci Slate³

DaVinci BellaforteShake³

DaVinci Bellaforte Slate³

DaVinci Valoré Shake³

DaVinci Valoré Slate³

Note:

Note 1: Underlayment and Asphalt Shingles are listed Class A components of a listed roof deck assembly by an Approved Agency. The third party program in which products are certified, carry a label, and are listed in the directory of an agency accredited by the International Accreditation Service, Inc. (IAS), or by an accredited body that is a partner with IAS in a mutual recognition arrangement, pertaining to certification bodies and their compliance with ISO/IEC Guide 65, General Requirements for Bodies Operating Product Certification Systems. These underlayment and asphalt shingle components are to meet Class A Classification when tested to ASTM

E108 or UL 790.

Note 2: Underlayment and Asphalt Shingle components are to be installed with mechanical fasteners in accordance with the manufacturer’s published installation instructions. Self-adhering or adhesive applied underlayment and asphalt shingle installations are outside the scope of this listing.

Note 3: These products are listed and labeled under QAI’s certification program, and under requirements outlined in ICC-ES AC07.

The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.