Directory of Listed Products

ELECTRICAL PRODUCTS LISTING PROGRAM

Class:

Fans and Ventilators

Customer:

Eneready Products Ltd.

Location:

4-6420 Beresford Street, Burnaby, BC, V5E 1B6, Canada

Listing No.:

E10526

Project No.:

E10526-1201

Effective Date:

November 16, 2012

Last Revised:

N/A

Expires:

N/A

Standards:

CSA C22.2 No. 113-2012 - Fans and Ventilators
UL 1812 - Ducted Heat Recovery Ventilators

Product:

Indoor, Cord-connected Energy Recovery Ventilators

Markings:

Products are marked in a permanent manner where it is readily visible after installation with the following: Manufacturer’s Name, Trademark or other recognized symbol of identification; Model Designation; Month and Year of Manufacture; Rated Input Voltage; Frequency; Amperes or Volt-Amperes Input; QAI logo with the “c” and "US" identifier; QAI File Number E10526; and the wording “CSA C22.2 No 113-10 and UL 1812-03”

Warning markings as required in both national languages (Canada).

Models:

Model Description	Voltage	Current	Hz	Wattage	Phase
Model 1000DPC/NP/NPC	120Vac	1.2AAC	60Hz	N/A	1
Model 2000DPC/NP/NPC	120VAC	2.3AAC	60Hz	N/A	1

Note:

Model NP - Non-defrost, Posh (24VAC)
Model NPC - Non-defrost, Posh (24VAC) , Circuit board (12VDC)
Model DPC - defrost/Recirculation, Posh (24VAC), Circuit board (12VDC

The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.