Directory of Listed Products
  
 

Go to Directory Page

 

  
  FIRE DOOR LISTING PROGRAM  
  Class: Fire Door Core  
       
  Customer: BASF SE  
  Location:

Frankenthal, Germany

  
       
  Listing No.: F411-2  
  Effective Date: October 12, 2012  
  Last Revised: October 12, 2012  
  Expires: N/A  
       
  Standards:

CAN/ULC-S104

Standard Method for Fire Tests of Door Assemblies

UL10 (b)

Fire Tests of Doors Assemblies

UL10 (c)

Fire Tests of Doors Assemblies (Category “B”)

NFPA-252

Standard Methods of Fire Tests of Door Assemblies

UBC-7-2 (1994)

Uniform Building Code

UBC-7-2 (1997)

Uniform Building Code

ASTM E2074

Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
 
       
  Product: Fire Door Cores  
       
  Markings: Marking:
Each container of the subject product, as delivered to the customer, is suitably marked using Permanent label stock with permanent adhesive with the following:

  1. QAI logo with ‘c’ and ‘us’ indicator
  2. Manufacturers name or trademark
  3. City and state of manufacture
  4. Model/Listing number or product description
  5. QAI file number (F411)
  6. Traceability Information: date of manufacture or serial number

Marking Method:

Permanent label stock fastened with pins or permanent adhesive.   

  
       
  Models:

FIRE DOOR CORES:  

Core Models:

Core Model:

No. of Plies

Core Thickness:

Palusol SW 2

3

3/16”

(0.1875”)

Palusol SW 3

3

9/32”

(0.2813”)

Palusol SW 20-1

3

5/16”

(0.3125”)

Palusol SW 45-1

6

5/8”

(0.6250”)

Palusol SW 60-1

7

5/8”

(0.6250”)

Palusol SWR 90-1

7

5/8”

(0.6250”)

Palusol SWR 90-2

11

7/8”

(0.8750”)

Limitations

For use in fire doors listed under BASF and manufactured or assembled by companies identified within the BASF – Fire Door Assembly Listing (F411-1).
 
       
  Note:

Refer to QAI evaluation report F411-2 and the applicable test reports for test assembly configurations used for fire endurance testing.    

Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction (AHJ).

  
 
 
 
  The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.

 
   

Copyright QAI Laboratories, 2011