Directory of Listed Products
  
 

Go to Directory Page

 

  
  RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM  
  Class: Plumbing Fixtures  
       
  Customer: Dodgen Industries, Inc.  
  Location: Humboldt, Iowa  
       
  Listing No.: REC542-2  
  Effective Date: August 25, 2009  
  Last Revised: August 25, 2009  
  Expires: N/A  
       
  Standards:

CSA B45.0-02 “General Requirements for Plumbing Fixtures”

CSA B45.5-02 “Plastic Plumbing Fixtures”

ANSI Z124.1.2-2005 “American National Standard for Plastic Bathtub and Shower Units”

ANSI Z124.3-2005 “American National Standard for Plastic Lavatories”		  
       
  Product: Fiberglass shower stall enclosures with and without integral lavatory sinks  
       
  Markings:

All plumbing fixtures shall be permanently marked in a visible location after installation with the following:

  1. The date of manufacture
  2. The name or recognized trademark of the manufacturer
  3. The wording “Plumbing Fixtures/Appareils Sainitaires”.
  4. The QAI logo with the “C”, “US”, and “RV” indicators in the 7 to 8 o’clock position, 6 o’clock position, and the 1 to 2 o’clock position respectively. The “C”, “US”, and “RV” indicators are a minimum of 1 mm in height.
  
       
  Models:

Model Number                Model Name                            Model Description

207-00156                      Rear Bath Shower                    Fiberglass shower

207-00157                      Rear Side Bath Shower             Fiberglass shower

207-00158                      32’ Shower                              Fiberglass shower  

207-00155                      22’ Shower                              Fiberglass shower with  integral lavatory sink                             

                                                                                    		 
       
  Note: The listed product is certified as a component only where the suitability of the final combination with a Recreational Vehicle is to be determined by the Recreational Vehicle Certifier.  
 
 
 
  The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.

 
   

Copyright QAI Laboratories, 2011