CSA A277-16 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”
National Building Code of Canada
British Columbia Building Code 2012
C22.1 Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations

Note: Various provinces have amendments to the national building code, jurisdictions may require structures to comply with provincial/municipal codes in lieu of the national building code, the local AHJ should be consulted on the applicable requirements.

Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.

Business Commercial Industrial Structures

All markings must be permanent and visible after installation.
1. The QAI label (item 1096 – CSA A277 Compliance label) is normally located in close proximity to the electrical panel.
• Certification label serial number
• QAI certification logo with the “c” identifier
• QAI logo shown here:

2. The specification nameplate (item 1068, 8-1/2” x 14” size) is located
in close proximity to the electrical panel and includes:
• Manufacturer’s Name and Address
• Date of Manufacture
• Model Serial Number or Product Code
• Foundation Type (Perimeter Foundation Wall or Piers)
• Floor live Load
• Specified Snow Load (1/50)
• Seismic Response Sa (0.2)
• Hourly Wind Pressure (1/50)
• Envelope Effective Thermal Resistance
• Windows/Doors/Skylights Thermal Characteristics
• Outside Design Temperature (Heal Loss or Heat Gain)
• Factory Installed Appliances
• Site Installed Components, Assemblies, and Systems
• Electrical Systems Voltage, Frequency, and Amperage

3. Other Markings as required by the relevant codes.

The QAI label and specification nameplate are available from QAI and must
be applied at the factory.

Structures are used for single Major Occupancy classified as Group F,
Division 3 – Low Hazard Industrial occupancies, constructed in multiple
modules in single storey configurations. Structures classified under this
occupancy are not intended for general public access.

Structures under this listing typically include but not limited to water
treatment plants or other similar buildings for water treatment systems. This
listing does not apply to sleeping quarters, office spaces and other
residential or commercial buildings and/or any buildings designed for
multiple Major Occupancies.

For a full list of structures covered under this occupancy please refer to
Appendix A, Division B of the National Building Code and British Columbia
Building Code.
This Listing applies to the structure only. QAI Listing does not apply to the
water treatment process or related water treatment equipment contained
within the structure. Consult the registered design professional regarding
the process equipment.

Structural:
Steel frame structure.

Electrical Ratings:
600V, 60Hz, 400A max.

Heating/Ventilation:
Electric unit heaters. Units to be Electric only. Systems may be equipped with a HVAC system.

Plumbing:
None.

Gas Systems:
None.