CSA A277   “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”

Alberta Building Code 2014 (Part 9)

Note: Various provinces and territories have amendments to the national building code, jurisdictions may require structures to comply with provincial/municipal codes in lieu of the national building code, the local AHJ should be consulted on the applicable requirements.”

Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.

Relocatable Industrial Structures

All markings must be permanent and visible after installation.
− The QAI label (item 1095 – black lettering with silver background) is normally located in close proximity to the electrical panel.
QAI logo shown here:

− The specification nameplate (item 1068, 8-1/2” x 14” size) is located in close proximity to the electrical panel and includes:
− Manufacturer’s Name and Address
− Date of Manufacture
− Model Serial Number or Product Code
− Foundation Type (Perimeter Foundation Wall or Piers)
− Floor live Load
− Specified Snow Load (1/50)

− Seismic Response Sa (0.2)
− Hourly Wind Pressure (1/50)
− Envelope Effective Thermal Resistance
− Windows/Doors/Skylights Thermal Characteristics
− Outside Design Temperature (Heal Loss or Heat Gain)
− Factory Installed Appliances (by others)
− Site Installed Components, Assemblies, and Systems
− Electrical Systems Voltage, Frequency, and Amperage (by others)

Other Markings as required by the relevant codes.

The QAI label and specification nameplate are available from QAI and must be applied at the factory.

The scope of Structures covered in this listing include:

Buildings:
Relocatable Industrial Structures under Part 4, 9, and 10 of Alberta Building Code used for Major Occupancy classified as Group F Division 2 – Medium‐Hazard Industrial Occupancies. Building is comprised of single module not intended for general public access. Structures are designed and constructed within the limitations of Part 4 and Part 9 of the applicable building codes. This covers only the structural and building envelope of the structure.

Structures described above typically include units used as power plants and similar temporary structures for electrical mobile equipment.

Light steel frame structure built on top of steel base frame. The steel building shall be manufactured by companies certified in accordance with the requirements of CSA A660 “Certification of Manufacturers of Steel Building Systems”.

This listing does not apply to sleeping quarters, construction camps, dining trailers, washcars, office spaces, storage units and other residential or commercial buildings and/or any building designed for multiple major occupancies. Also, it is not includes vehicular lighting or brake wiring systems when module is on wheels.

The structures for use in hazardous locations are not included in this report and QAI certification. This certification does not cover completion of sprinkler and fire alarm system.