USA 888.540.4024      CANADA 877.461.8378
info@qai.org
Korean GermanSpanish
  • HOME
  • NEWS
  • EVENTS
QAIQAIQAIQAI
  • 회사소개
    • 기업>QAI팀
    • 기업>QAI 소개
    • 기업
    • 기업>뉴스
    • 기업>채용정보
    • 기업>Contact
  • 자원
    • 자원>브로셔
    • 양식
    • 인정 현황
    • 자원>추천 프로그램
    • 자원>비디오
  • 서비스
    • 핵심 서비스
      • 제품 인증
      • 제품 시험
      • 제품 품질 검사 서비스
      • 가격 경쟁력
      • 인정 현황
      • 양식
    • 산업 분야
      • 건축 자재 시험 및 인증 – 기초공사에서 지붕까지
      • 전기 안전 시험 인증
      • 배관 인증
      • EMC 전자파 적합성 테스트
      • RVs(레저용 차량), 트레일러, 구조물
      • 캐나다 교통국
      • 창호 테스트
      • 중국강제인증(CCC)
      • 중국 무선기기 SRRC 인증
      • SPE-3000 의료기기 전기안전시험
    • 솔루션
      • 그린 서비스(Green Service)
      • 화재 및 가연성 시험
      • 위험 지역(HazLoc, Hazardous Location)에 설치되는 전기제품
  • 리스팅 디렉토리

화재 및 가연성 시험

    Home 화재 및 가연성 시험

    화재 테스트s

    Fire Testing of Materials

    QAI는 물질의 화재 및 가연성 시험, 대규모 건축 자재 시험, 표면연소 특성(스타이너 터널) 시험, 가정용 및 상업용 소규모 기구(또는 소비재)의 화재 및 가연성 테스트를 수행합니다. QAI는 최신식 장비와 시설을 이용해 제품에 필요한 여러 규격에 따라 테스트 절차를 진행하고 고객을 지원해 드립니다.

    대형 건축 자재

    QAI는 최신의 장비를 갖추고 전문 지식을 지닌 전문가를 투입해 다양한 지역에서 대형 건축 자재(최대 크기가 3m를 넘는 시료)의 화재 및 가연성 테스트를 제공합니다. 아래는 QAI가 테스트를 진행하는 규격 목록입니다.

    • ASTM E119 – (Equivalent to ANSI/UL 263 and NFPA 251)
    • CAN/ULC S101 – Standard Methods of Fire Endurance Tests of Building Construction and Materials
    • ASTM E814 – Standard Test Method for Fire Tests of Penetration Firestop Systems
    • CAN/ULC S115 – Standard Method of Fire Tests of Firestop Systems
    • NFPA 286 – Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth, 2011 Edition
    • UL 1715 – Fire Test of Interior Finish Material
    • NFPA 275 – Standard Method of Fire Tests for the Evaluation of Thermal Barriers Used Over Foam Plastic Insulation
    • UL 10B – (Equivalent to UBC 7-2) – Fire Tests of Door Assemblies
    • CAN/ULC S104 – Standard Method for Fire Tests of Door Assemblies
    • CAN/ULC S134 – Standard Method of Fire Test of Exterior Wall Assemblies
    • ASTM E108 – (Equivalent to UL 790, UBC 15-2) Standard Test Methods for Fire Tests of Roof Coverings
    • CAN/ULC S107 – Methods of Fire Tests of Roof Coverings

    표면연소특성(스타이너 터널) 테스트

    QAI는 최신의 장비와 지식을 갖춘 전문가를 투입해 다양한 장소에서 표면연소특성 테스트를 실시합니다.

    • ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials (Equivalent to UL 723, NFPA 255, UBC 8-1)
    • ASTM E2768 – Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
    • CAN/ULC S102 – Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies
    • CAN/ULC S102.2 – Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies
    • UL 1887 – Fire Test of Plastic Sprinkler Pipe for Flame and Smoke Characteristics
    • UL 1256 ­- Fire Test of Roof Deck Constructions
    • CAN/ULC S126 – Standard Method of Test for Fire Spread Under Roof-Deck Assemblies

    소형 재료에 대한 가연성 테스트

    • ASTM D1929 – Standard Test Method for Determining Ignition Temperature of Plastics
    • ASTM D635 – Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
    • UL 94 – Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
    • ASTM E136 – Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
    • CAN/ULC S114 – Standard Method of Test for Determination of Non-Combustibility in Building Materials
    • ASTM D2843 – Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
    • ASTM E162 – Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
    • NFPA 701 – Standard Methods of Fire Tests for Flame Propagation of Textiles and Films, 2010 Edition

    매트리스 테스트

    • 16 CFR 1633 – Open Flame Testing of Mattress Sets (Federal)
    • 16 CFR 1632 – Cigarette Resistance Testing of Mattresses and Mattress Pads (Federal)
    • ASTM E1590 – Fire Testing of Mattresses
    • Cal TB 129 – Fire Testing of Mattresses for Public Occupancies
    • Cal TB 121 – Fire Testing of Mattresses for High Risk Occupancies
    • BFD IX-11 – Mattress Fire Test (Boston Area)

    영국 규격 시험

    *BS 7175- 무염 연소 및 불꽃점화원에 의한 침대 커버 및 베개의 점화성 시험 방법
    *BS 7177 – 매트리스, 매트리스 패드, 다이븐 베드(두꺼운 받침대와 매트리스로 된 침대), 침대 받침대의 내점화성 사양
    *BS 6807 – 매트리스, 겉감을 간 다이븐 베드 및 침대 받침대에 대한 점화성 시험 방법
    *BS EN 597 – 매트리스 및 겉감을 간 침대 받침대의 점화성 평가

    가구(쇼파 등)의 겉감

    • Cal TB 133 – Flammability Testing of Seating for Public Occupancies
    • ASTM E1537 – Fire Testing of Upholstered Furniture
    • BFD IX-10 – Regulation of Upholstered Furniture (Boston Area)
    • Cal TB 117 – Flammability Testing of Components of Upholstered Furniture
    • Furniture and Furnishings (Fire) (Safety) Regulations
    • NFPA 260 – Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture

    영국 규격 시험

    • * BS 7176 – Specification for Resistance to Ignition of Upholstered Furniture for Non-Seating by Testing Composites
    • * BS 5852 – Methods of Test for Assessment of the Ignitability of Upholstered Seating by Smouldering and Flaming Ignition

    Sources * BS EN 1021 – Assessment of the ignitability of upholstered furniture

    인정(Accreditaions)

    QAI는 IAS와 국제인정기구(IAS, International Accreditation Service)와 캐나다표준위원회(SCC, Standards Council of Canada)로부터 시험,인증 및 검사 기관으로 인정받았으며 ICC-ES, CCMC(캐나다 건설 자재 센터), 플로리다 건물 위원회(Florida Building Commission), 마이애미-데이드 카운티, 로스 앤젤레스 건설부(Los Angeles City Building Department), 캘리포니아 주 소방국장(California State Fire Marshal) 등으로부터 공인받은 기관입니다.

    • 서비스
      • 핵심 서비스
        • 제품 인증
        • 제품 시험
        • 제품 품질 검사 서비스
        • 가격 경쟁력
        • 인정 현황
        • 양식
      • 산업 분야
        • 건축 자재 시험 및 인증 – 기초공사에서 지붕까지
        • 전기 안전 시험 인증
        • 배관 인증
        • EMC 전자파 적합성 테스트
        • RVs(레저용 차량), 트레일러, 구조물
        • 캐나다 교통국
        • 창호 테스트
        • 중국 무선기기 SRRC 인증
        • 중국강제인증(CCC)
        • SPE-3000 의료기기 전기안전시험
      • 솔루션
        • 그린 서비스(Green Service)
        • 화재 및 가연성 시험
        • 위험 지역(HazLoc, Hazardous Location)에 설치되는 전기제품
    • 리스팅 디렉토리

    QAI Logo - Long shape for footer.

    Founded in 1995 by a group of experienced certification and testing experts, QAI is an independent third-party testing, inspection and certification organization which serves the building industry, government and individuals with cost effective solutions through our global, in-house capabilities / services.

    LEARN MORE

    Latest News

    • QAI Team and ESAM, ICC & ICC-ES Delegates at QAI Rancho

      ESAM 및 ICC/ICC-ES 대표단, QAI 미국 LA 지사 방문

      미국 캘리포니아에 위치한 QAI LA 지사에 ESAM (Emirates Authority for Standardization and

      5 4월, 2019
    • VBO at QAI during Lab Tour at EMC Chamber

      QAI 본사, 밴쿠버 건축 관계 당국 대상 데모 시연 선보여

      QAI는 밴쿠버의 건축규정 관계당국의 캐나다 버나비 소재 당사 본사 방문을 기쁘게 생각합니다.

      4 4월, 2019
    • QAI, KTC와 업무협약 체결

      QAI와 KTC (한국기계전자시험연구원)은 제조업체들이 국제 시장에서 충족되는 제품을 더욱 효율적으로 출시할 수

      22 3월, 2019

    Contact

    A tiny US Flag for contact number USA 1(888)540.4024

    A tiny Canada Flag for contact number Canada 1(877)461.8378

    A tiny Europe Flag for contact number Europe info@qai.org

    A tiny China Flag for contact numberChina china-info@qai.org

    A tiny Korea Flag for contact numberS Korea asia-info@qai.org
    Copyright 2018 QAI Laboratories. All rights reserved.
    • EMC 서비스
    • EMC 전자파 적합성 테스트
    • FAQ
    • Ko 집
    • QAI의 글로벌 지사
      • BURNABY
      • LOS ANGELES
      • TORONTO
      • TULSA
      • 군포 (한국)
      • 상하이 (중국)
    • RVs(레저용 차량), 트레일러, 구조물
    • SPE-3000 의료기기 전기안전시험
    • 가격 경쟁력
    • 건축 자재 시험 및 인증 – 기초공사에서 지붕까지
    • 그린 서비스(Green Service)
    • 기업
    • 기업>Contact
    • 기업>QAI 소개
    • 기업>QAI팀
    • 기업>뉴스
    • 기업>채용정보
    • 리스팅 디렉토리
    • 반도체장비 안전 평가
    • 배관 인증
    • 서비스
    • 양식
    • 위험 지역(HazLoc, Hazardous Location)에 설치되는 전기제품
    • 인정 현황
    • 자원>브로셔
    • 자원>비디오
    • 자원>추천 프로그램
    • 전기 안전 시험 인증
    • 전기 특별 검사-delete-page
    • 제품 시험
    • 제품 인증
    • 제품 품질 검사 서비스
    • 중국 무선기기 SRRC 인증
    • 중국강제인증(CCC)
    • 창호 테스트
    • 캐나다 교통국
    • 화재 및 가연성 시험
    QAI

    QAI Korea Electrical and EMC - Popup Banner