Directory of Listed Products
  
 

 

  
  BUILDING PRODUCTS LISTING PROGRAM  
  Class: Thermal Insulation  
       
  Customer: LOGIX Insulated Concrete Forms, Ltd.  
  Location:

9242 Pinetree Place, Whistler, BC, Canada, V0N 1B9

  
  Website: www.LOGIXicf.com  
       
Listing No.: B1031-2
 
  Effective Date: May 30, 2014  
Last Revised: November 26, 2014
  Expires: N/A  
       
  Standards:

CAN/ULC S701 “Thermal Insulation, Polystyrene, Boards and Pipe Covering”.

CAN/ULC S102.2 “Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies”.

ASTM C578 “Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation”.

ASTM E84 - “Standard Test Method for Surface Burning Characteristics of Building Materials”.

  
       
  Product:

LOGIX Halo™ Expanded Polystyrene (EPS) Thermal Insulation

LOGIX Heat Sheet Expanded Polystyrene Subfloor Insulation Products

  
       
  Label: Product is marked with labels supplied by LOGIX Insulated Concrete Forms, Ltd.  The label includes the manufacturer’s name, trademark, or other recognized symbol of identification, the product model designation, month and year of manufacture or equivalent, QAI logo with the ‘US’ and “C” identifier, and CAN/ULC S701 Type, ASTM C578 Type, CAN/ULC S102.2, and ASTM E84 FSI and SDI Rating.  Labels are applied to palletized finished products to ensure visibility on the jobsite.  
       
  Ratings:

The following outlines LOGIX Halo™ and LOGIX Heat Sheet Expanded Polystyrene (EPS) Thermal Insulation Performance determined in accordance with the noted standards. 

LOGIX Halo™ Expanded Polystyrene Thermal Insulation Properties per CAN/ULC S701

PROPERTY TYPE 1 TYPE 2 TYPE 3
Thermal Resistance Minimum at 25 mm Thickness (m2*oC/W) 0.76 0.80 0.81
Water Vapour Permeance Maximum at 25 mm Thickness (Ng/Pa*s*m2) 300 200 130
Dimensional Stability Maximum Linear Change (%) 1.5 1.5 1.5
Flexural Strength Minimum (kPa) 170 240 300
Water Absorption By Volume Maximum (%) 6.0 4.0 2.0
Compressive Strength Minimum at 10% Deformation (kPa) 70 110 140
Limiting Oxygen Index Minimum (%) 24 24 24

LOGIX Heat Sheet Expanded Polystyrene Thermal Insulation Properties per CAN/ULC S701

PROPERTY TYPE 2 TYPE 3
Thermal Resistance Minimum at 25 mm Thickness (m2*oC/W) 0.80 0.81
Water Vapour Permeance Maximum at 25 mm Thickness (Ng/Pa*s*m2) 200 130
Dimensional Stability Maximum Linear Change (%) 1.5 1.5
Flexural Strength Minimum (kPa) 240 300
Water Absorption By Volume Maximum (%) 4.0 2.0
Compressive Strength Minimum at 10% Deformation (kPa) 110 140
Limiting Oxygen Index Minimum (%) 24 24

LOGIX Halo™ Expanded Polystyrene Thermal Insulation Properties per ASTM C578

PROPERTY TYPE VIII TYPE II TYPE IX
Compressive Strength Minimum @ 10% Deformation (psi) 13.0 15.0 25.0
Thermal Resistance Minimum @ 1 inch Thick (F*ft2*h/Btu) 4.48 4.35 4.59
Flexural Strength Minimum (psi) 30.0 35.0 50.0
Water Vapor Permeance @ 1 inch Thickness Maximum (Perms) 3.5 3.5 3.5
Water Absorption By Volume Maximum (%) 3.0 4.0 2.0
Dimensional Stability Linear Change Maximum (%) 2.0 2.0 2.0
Oxygen Index Minimum (%) 24.0 24.0 24.0
Density Minimum (lbs/ft3) 1.15 1.35 1.80

LOGIX Heat Sheet Expanded Polystyrene Thermal Insulation Properties per ASTM C578
PROPERTY TYPE II TYPE IX
Compressive Strength Minimum @ 10% Deformation (psi) 15.0 25.0
Thermal Resistance Minimum @ 1 inch Thick (F*ft2*h/Btu) 4.53 4.59
Flexural Strength Minimum (psi) 35.0 50.0
Water Vapor Permeance @ 1 inch Thickness Maximum (Perms) 3.5 2.5
Water Absorption By Volume Maximum (%) 4.0 2.0
Dimensional Stability Linear Change Maximum (%) 2.0 2.0
Oxygen Index Minimum (%) 24.0 24.0
Density Minimum (lbs/ft3) 1.35 1.80

LOGIX Halo™ and Heat Sheet Expanded Polystyrene Thermal Insulation Surface Burning Characteristics per ASTM E84

Type VIII, Type II, Type IX DENSITY MAXIMUM THICKNESS FLAME SPREAD INDEX (FSI) SMOKE DEVELOPED INDEX (SDI)
Type VIII, Type II, Type IX Maximum 2.20 lbs/ft3 4.0 Inches Maximum ≤ 25 ≤ 450
 
       
  Note:

Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction. 

Product is to be installed in accordance with the manufacturer’s published installation instructions by qualified installing personnel.
 
 
 
 
  The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
  
   

Copyright QAI Laboratories, 2014