Directory of Listed Products

Building Products Listing Program

Class:

Roofing Underlayment

Customer:

System Components Corporation

Location:

PO Box 2432, Issaquah, WA 98027

Listing No.:

B1041-1

Project No.:

Effective Date:

March 30, 2012

Last Revised:

July 3, 2013

Expires:

N/A

Product:

FelTex^®, ProTex^® and CoverPro^™ 15 High Performance Roof Wraps: Roll roofing underlayment, for use as secondary protection under roof tile or shingle roof covering systems.

Model Designation Standard Width Standard Length Weight

FelTex^®
48 inches
(1.22 m)
200 ft (76.20 m)

or
100 ft (30.48 m) 3.2 lbs/100 ft²(156 g/m²)

FelTex^®
48 inches
(1.22 m)
200 ft (76.20 m)

or
100 ft (30.48 m) 2.6 lbs/100 ft² (127 g/m²)

CoverPro^™ 15
40 inches

(1.02 m)

Or

42 inches
(1.07 m)
200 ft (76.20 m)

or
100 ft (30.48 m)
2.2 lbs/100 ft²
(108 g/m²)

Website:

www.systemcomponents.net

Additional Info:

http://www.icc-es.org/reports/pdf_files/ICC-ES/ESR-1293.pdf

Standards:

CAN/CSA-A220.1 “Installation of Concrete Roof Tiles”.

CAN/CSA-A123.3 “Asphalt Saturated Organic Roofing Felt”.

ASTM D2626 “Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing”.

ASTM D226 “Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing”.¹

TAS 104-95 ” Test Procedure for Nail-on Underlayment for Use with

Discontinuous Roof Systems”.^See^{Limitations of Use}

The rating for the noted System Components products can be found in ratings section of this listing.

Ratings:

The following ratings apply to System Components ProTex^®, FelTex^® and CoverPro^™ 15 products:

PRODUCT

TEST METHOD

CLASSIFICATION

ProTex^®

CSA A220.1

CSA A123.3¹

ASTM D2626¹

ASTM D226¹

TAS 104

Meets Requirements

Type 2

Meets Requirements

Type II

Meets Requirements

FelTex^®

CSA A220.1

CSA A123.3¹

ASTM D2626¹

ASTM D226¹

TAS 104

Meets Requirements

Type 2

Meets Requirements

Type II

Meets Requirements

CoverPro^™

CSA A123.3¹

ASTM D226¹

Type 1

Type I

Note 1: CSA A123.3, ASTM D2626, and ASTM D226 outline specifications for asphalt-impregnated organic felt materials. System Components ProTex^®, FelTex^® and CoverPro^™ 15 high performance underlayment products were tested and found to comply with the performance specifications outlined in CSA A123.3, ASTM D2626 and ASTM D226 for the classifications noted.

Limitations of Use:

Systems Components ProTex^® and FelTex^® high performance underlayment products, when installed for use in High Velocity Hurricane Zones, require roof covering products including tile, are properly braced on blocked to ensure tile slippage is avoided where roof coverings are in direct contact with the noted System Component Products.

Label:

Product units are marked with the following information:

1. Manufacturer’s Name

2. Product Name.

3. Month and Year of Manufacture

4. QAI logo with the “US” and “C” identifier

5. Listing number

6. Standard numbers and ratings

7. ICC-ES ESR-1293(ProTex^® and FelTex^® products)

Note:

These products are subjected to limitations as specified above and must be installed in accordance with the manufacturers’ instructions. Authorities having jurisdiction should be consulted regarding allowable applications.

The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.