Directory of Listed Products

ELECTRICAL PRODUCTS LISTING PROGRAM

Class:

Tubular Motors

Customer:

Wespac International

Location:

311 NE 14th Avenue,
Fort Lauderdale, FL 33301
USA

Listing No.:

E10543

Project No.:

E10543-1302

Effective Date:

May 24, 2013

Last Revised:

June 18, 2013

Expires:

N/A

Standards:

CSA C22.2 No. 247-92 - Operators and Systems of Doors, Gates, Draperies, and Louvres
UL 325 - Door, Drapery, Gate, Louver, and Window Operators and Systems

Product:

Tubular Motors

Markings:

Products are marked in a permanent manner where it is readily visible after installation with the following: Manufacturer’s Name, Trademark or other recognized symbol of identification; Model Designation; Month and Year of Manufacture; Rated Input Voltage; Amperes or Volt-Amperes Input; QAI logo with the “c” and “us” identifiers; QAI File Number E10543; and the wording CSA C22.2 No. 247 and UL 325.

Warning markings as required in both national languages.

Models:

Model	Descriptions
ES2512D-1.5/28	"DC12V 25mm Switch control dual range tubular motor learn key inside Diameter (mm) : 25 Length (mm) : 275 (10-3/4"") Torque (Nm) : 1.5 Speed (RPM) : 28 a. Nominal torque (Nm) 1.5 b. Stall torque at 25℃:3 c. Nominal speed (rpm) : 28 d. No load speed (rpm) : 32 e. Maximum number of turns in one direction No : limit f. Current consumption at nominal torque (mA): 1500 g. Current consumption at stall (mA): 3000 h. Nominal supply voltage (V) : 12 i. Minimum supply (V) : 9.5 j. Maximum running time (min) :10 k. Working temperature (℃): -10 to 60 l. Supply cable type 2*0.20 m. Supply cable length (m) 2 n. net weight(g)272"
ES2512D-0.7/34	"DC12V 25mm Switch Control Standard tubular motor learn key inside Diameter (mm) : 25 Length (mm) : 275 (10-3/4"") Torque (Nm) : 0.7 Speed (RPM) : 34 a. Nominal torque (Nm) : 0.7 b. Stall torque at 25℃ : 1.0 c. Nominal speed (rpm) :34 d. No load speed (rpm) : 38 e. Maximum number of turns in one direction No limit； f. Current consumption at nominal torque (mA): 800 g. Current consumption at stall (mA): 1200 h. Nominal supply voltage (V):12 i. Minimum supply (V) :9.5 j. Maximum running time (min): No limit k. Working temperature (℃) : -10 to 60 l. Supply cable type (mm2) : 2*0.20 m. Supply cable length (m): 2 n. net weight(g) : 220"
EY2512A-0.7/34	"DC12V 25mm Remote Control Standard tubular motor learn key inside Length (mm) : 275 (10-3/4"") Torque (Nm) : 0.7 Speed (RPM) : 34 a. Nominal torque (Nm) : 0.7 b. Stall torque at 25℃ : 1.0 c. Nominal speed (rpm) :34 d. No load speed (rpm) : 38 e. Maximum number of turns in one direction No limit； f. Current consumption at nominal torque (mA): 800 g. Current consumption at stall (mA): 1200 h. Nominal supply voltage (V):12 i. Minimum supply (V) :9.5 j. Maximum running time (min): No limit k. Working temperature (℃) : -10 to 60 l. Supply cable type (mm2) : 2*0.20 m. Supply cable length (m): 2 n. net weight(g) : 220"

Condition of Acceptance:

These products are supplies to manufactures and are certified as a “Component” for assembly into certified end product equipment, where the suitability of the combination is determined in the end use.

Note:

The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.