Directory of Listed Products
  
 

 

  
  PLUMBING PRODUCTS LISTING PROGRAM  
  Class: Plumbing Product – Piping Systems and Accessories  
       
  Customer: UPONOR, INC.  
  Location: Apple Valley, Minnesota  
       
  Listing No.: P321-3  
  Project No.:    
  Effective Date: August 28, 2012  
  Last Revised: July 14, 2014  
  Expires: N/A  
       
  Standards:

CAN/ULC S102.2 “"Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies".

  
       
Product:

UPONOR PEX Piping, Fittings and Valves.
       
  Website: www.uponor-usa.com  
       
  Models: UPONOR AquaPEX Cross-linked polyethylene (PEX) pipe (natural, red, blue); hePEX Pipe (natural, red, blue); RCW PEX; installed with EP ProPEX connectors, PEX rings, EP ProPEX Connectors, or Brass CPVC adaptor fittings and Valves  
       
Markings:

All PEX tubing, connectors, angle stop valves, and other accessories (if sufficient space available) shall be permanently marked with the following content applied to an area that is readily visible after installation: 

  • Manufacturers name or trademark
  • Model Name
  • Standard: CAN/ULC S102.2
  • Flame Spread Rating < 25, Smoke Developed Rating < 50
  • Nominal Size
  • QAI Logo with ‘c’ indicator
       
  Ratings:

UPONOR AquaPEX Pipe (natural, red, blue)1; hePEX (natural, red, blue); RCW PEX

described below have the following Surface Burning Characteristics per CAN/ULC S102.2:

Product

Limitations

Flame Spread Rating

Smoke Developed Classification

(Water-Filled Listing Only) AquaPEX pipe (natural, red, blue)1; hePEX (natural, red, blue); RCW PEX; PEX rings; EP ProPEX Connectors, Brass CPVC adaptor fittings and Valves.

2-inch maximum nominal diameter tubing of water-filled pipe. There are no spacing requirements between adjacent runs of this pipe assembly

Optional: Pipe insulation can be installed maintaining ratings noted.2

< 25

< 50

Note1: Different sizes corresponding to different colors of AquaPEX and hePEX are dependent on manufacturer’s availability

 

Note2: List of approved pipe insulation providers:

The following list of pipe insulation types (at minimum thickness of ˝”) are approved for use with UPONOR’s hePEX, AquaPEX and Brass CPVC adaptor fittings at a maximum nominal diameter of up to 3”. The insulations noted when Listed to ASTM C547 by an approved agency are approved for use at the dimension specified above.

Insulation

Flame Spread Rating (according to ASTM E84)

Smoke Developed Rating (according to ASTM E84)

Mason Alley-K

< 25

< 50

Armaflex Composite

< 25

< 50

Johns Manville Micro-Lok

< 25

< 50

Johns Manville Micro-Lok HP

< 25

< 50

Owens Corning Vapor Wick

< 25

< 50

Owens Corning Fiberglass

< 25

< 50

GLT Pipe and Tank

< 25

< 50

Knauf Earthwool Redi-Klad

< 25

< 50

Nomalock

< 25

< 50

 
   
  Note: These products are subjected to limitations as specified above and must be installed in accordance with the manufacturers’ instructions. Authorities having jurisdiction should be consulted regarding allowable applications. See manufacturer’s listings for other standards listed under QAI certification programs.  
 
 
 
 

The materials, products or systems listed herein have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.

 
   

Copyright QAI Laboratories, 2015