Directory of Listed Products
  
 

Go to Directory Page

 

  
  FIRE DOOR LISTING PROGRAM  
  Class: Fire Door Slabs  
       
  Customer: Door Group Resources  
  Location:

Stockton, CA

  
       
  Listing No.: F413-1  
  Effective Date: October 23, 2012  
  Last Revised: October 23, 2012  
  Expires: N/A  
       
  Standards:

CAN/ULC S104

Standard Method for Fire Tests of Door Assemblies

UL10 (b)

Fire Tests of Doors Assemblies

UL10 (c)

Fire Tests of Doors Assemblies (Category “B”)

NFPA-252

Standard Methods of Fire Tests of Door Assemblies

UBC-7-2 (1994)

Uniform Building Code

UBC-7-2 (1997)

Uniform Building Code

ASTM E2074

Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies
 
       
  Product: 20 min Rated Fire Door Slabs with Hose Stream - Fusion  
       
  Markings: Marking:
Each container of the subject product, as delivered to the customer, is suitably marked using Permanent label stock with permanent adhesive with the following:

  1. QAI logo with ‘c’ and ‘us’ indicator
  2. Manufacturers name or trademark
  3. City and state of manufacture
  4. Model/Listing number or product description
  5. QAI file number (F413)
  6. Traceability Information: date of manufacture or serial number

Marking Method:

Permanent label stock fastened with pins or permanent adhesive.   

  
       
  Models:

SWING-TYPE FIRE DOOR SLABS:  

General Information: 

These door slabs systems are categorized as Category “B” door slabs.  These door slabs systems have been evaluated with a field applied "Category G - Edge-Sealing System".

This category includes doors evaluated with an edge-sealing system (Category G) field-applied to the labeled frame or door. The application of the edge-sealing system does not require any machining of the frame or door.  Please refer to "Category G - Edge-Sealing System" for individual manufacturer's listings.

These door slabs systems are eligible for use in any Category “C’ – Standard Frame.  These doors may also be installed in frames listed for Category “C” – Proprietary in accordance with the frame manufacturers’ individual listing.

These door slabs systems are eligible to bear the “S” (for Smoke & Draft Control assemblies) if a listed Category “H” – Smoke and Draft Gasket has been applied to the assembly.  Please refer to the individual gasket manufacturers’ Category “H” listings.

All door slabs systems listed below have been evaluated and tested to comply with the following standards CAN/ULC S104, UL 10(c), UBC 7-2 (1997) Part 1, NFPA 252 and ASTM E2074, “Standard Method of Fire Tests of Door Assemblies” (Positive Pressure) and CAN/ULC S104, UL 10(b), UBC 7-2 (1994), and NFPA 252, " Standard Method of Fire Tests of Door Assemblies” (Neutral Pressure), including hose stream.

Doors slab systems used in neutral pressure applications may not require the use of intumescent materials regarding the edge sealing between the perimeter of the door and the frame, smoke gasketing, or a combination thereof.  Options include frame mounting the intumescent and/or smoke gasketing, mortising the intumescent into the door perimeter, concealing the intumescent with the stile(s), or a combination of these methods.

Doors labeled for positive pressure applications must include installation instructions to be furnished by the door labeler.  Unless otherwise noted in the door’s installation instructions, all intumescent materials and smoke/draft control gasketing used in the assembly are to be installed per their respective manufacturers’ instructions.

Core Materials:

Fusion Door

·         Medium Density Fiberboard (MDF)

·         Minimum 48 pcf density

·         5/8” to 1-1/4” Nominal Thickness

- 5/8” thick edge tongue

Size Limitations:

Single Swing:

Maximum Width

4’0”

Maximum Height

8’0”

Minimum Slab Thickness

1-3/4”

Pairs:

Maximum Width

8’0”

Maximum Height

8’0”

Minimum Slab Thickness

1-3/4”

Note: 3-point latching is required

Double Egress 

·         Not Allowed

Listed Manufacturers:

Supa Doors

1732 Universal City Blvd.

Universal City, TX

78148

Contact: Jacob Kluger

jacob@supadoors.com

 

Listed Machiners:

Supa Doors

1732 Universal City Blvd.

Universal City, TX

78148

Contact: Jacob Kluger

jacob@supadoors.com
 
       
  Note:

Refer to QAI evaluation report F413-1 and the applicable test reports for test assembly configurations used for fire endurance testing.    

Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction (AHJ).

  
 
 
 
  The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.

 
   

Copyright QAI Laboratories, 2011