Mobilfab Inc.
Factory Built Structures Listing Program
- Mobilfab Inc.
- Business Commercial Industrial Structures – For Electrical Features Only
- Pointe-aux-Trembles, Quebec
- REC610-5
- REC610-5
- May 30, 2017
- December 20, 2021
- N/A
-
CSA A277-16 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”
C22.1 Canadian Electrical Code, Part I, “Safety Standard for Electrical Installations”
Note 1: Unless otherwise specified, the Standards and Codes noted are the most current versions in effect.
Note 2: Various provinces and territories have amendments to the Canadian Electrical Code, jurisdictions may require structures to comply with provincial/municipal codes in lieu of the Canadian edition, the local AHJ should be consulted on the applicable requirements.
-
Business Commercial Industrial Structures – For Electrical Features Only
-
All markings must be permanent and visible after installation.
1. The QAI label (item 1069 – black lettering with silver background) is normally located in close proximity to the electrical panel.
QAI logo shown here:2. The specification nameplate (item 1070, 8-1/2” x 7” size) is located in close proximity to the electrical panel and includes:
− Manufacturer’s Name and Address
− Date of Manufacture
− Model Serial Number or Product Code
− Factory Installed Appliances
− Site Installed Components, Assemblies, and Systems
− Electrical Systems Voltage, Frequency, and Amperage3. Other Markings as required by the relevant codes.
Note 3: The QAI label and specification nameplate are available from QAI and must be applied at the factory.
-
The scope of prefabricated buildings covered in this listing includes:
Structures:
Business Commercial Industrial Structures comprised of single or multiple modules complete with electrical wiring. Structures included in this listing typically include but are not limited to office space, stores, construction camp facilities such as washroom facilities, dormitories, kitchens and dining trailers, equipment buildings, and other similar commercial or industrial buildings.Electrical Ratings: Up to a maximum of 600/347V AC, 60Hz, 600A, single or 3 phase systems.
The operation of the complete fire alarm system is not included in this report and QAI certification. This report does not include structures for use in hazardous locations. This report does not include services other than the electrical nor does it include vehicular lighting or brake wiring systems.
Structures included in this listing are manufactured at a central facility and transported to the site. These modules include provisions for on-site interconnections and connection to electrical power supply. QAI certification covers any factory installed electrical services, equipment and fixtures. QAI certification is intended to obviate the necessity of further inspection by the local regulatory authorities except for site connections to services or to other modules and for site installed features.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.