QAI Electromagnetic Compatibility (EMC) Testing is your one-stop regulatory compliance partner for electromagnetic compatibility (EMC) and electromagnetic interference (EMI). Products are tested to the latest and applicable EMC/EMI requirements for domestic and international markets. QAI Electromagnetic Compatibility (EMC) Testing goes above and beyond being a testing facility—we are your regulatory compliance partner. QAI Electromagnetic Compatibility (EMC) Testing has the capability to perform RF Emissions and Immunity for all types of electronics manufacturing including Industrial, Scientific, Medical, Information Technology, Telecom, Wireless, Automotive, Marine and Avionics.
Electromagnetic Compatibility (EMC) Testing
Electromagnetic Compatibility (EMC) Testing
EMC and EMI Compliance Testing
EMC Compliance Testing Services
Product testing and certification compliance
RF Emissions Pre-Scans. Pre-scans are performed in our 3 meter Semi-Anechoic Chamber. There are many advantages for testing in Semi-Anechoic Chambers, including no ambient RF signals, accurate data, repeatable results and controlled environmental conditions. For R&D purposes, performing pre-scans in a semi-anechoic chamber is the preferred method by most design engineers. RF Emissions Final Testing. Final 3 meter and 10 meter RF emissions testing is completed at our state of the art 10 meter Open Area Test Site (OATS) located at Silver Valley Road in the UBC Malcolm Knapp Research Forest. The OATS is a partially enclosed 3 and 10 meter site. The central enclosure is constructed from Sintra plastic with nylon fasteners. The Semi-Anechoic Chamber (SAC) is a fully enclosed and shielded chamber constructed by ETS Lindgren. Final 3 meter measurements from 9 kHz to 40GHz can be performed in the SAC which meets NSA requirements for ANSI 63.4 and 63.7 from 30 MHz to 1 GHz and CISPR Site VSWR requirements up to 18 GHz.
QAI EMC Accreditations
EMC Testing Services | EMC Certification
We are recognized by major accreditation bodies for EMC and EMI testing. QAI EMC is IEC/ ISO 17025 accredited by the American Association for Laboratory Accreditation (A2LA). When you get your wireless or non-wireless products tested with us, global acceptance is within your reach.
Beyond EMC
In addition to EMC testing, QAI also offers electrical safety testing, electrical special inspections, field evaluation and hazardous location electrical safety inspections.
List of Standards
- Page 3 of 4RSS 215 Analogue Scanner Receiver Spectrum Management and ANSI C63.4 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
- ANSI/TIA-603-C Methods of measurement, and performance standards for radio equipment used in the private (dispatch) LMR services that employ FM or PM modulation, for transmission of voice or data using analog or digital techniques, with a frequency of 1 GHz or less.
- CISPR 16-2-1 Specification for radio disturbance and immunity measuring apparatus and methods-Part 2-1: Methods of disturbance measurements
- CISPR 16-2-2 Specification for radio disturbance and immunity measuring apparatus and methods-Part 2-2: Methods of measurement of disturbances and immunity Measurement of disturbance power
- CISPR 16-2-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity-Radiated disturbance measurements
- CISPR 16-2-4 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity.
- Immunity measurements EN 55011/CISPR 11 Industrial, scientific and medical (ISM) radio-frequency equipment
- EN 55012/CISPR 12 Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
- EN 55022/CISPR 22 Information technology equipment-Radio disturbance characteristics
- EN 55024/CISPR 24 Information technology equipment-Immunity characteristics
- EN 55103-1 Electromagnetic compatibility-Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use-Part 1: Emissions
- EN 55103-2 Electromagnetic compatibility-Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use-Part 2: Immunity
- EN/IEC 61000-3-2 Limits for Harmonic Current Emissions Testing < 16Amps
- EN/IEC 61000-3-3 Limitation of Voltage Fluctuations and Flicker < 16Amps
- EN/IEC 61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations
Immunity Tests
- EN/IEC 61000-4-2 Electrostatic Discharge Immunity Test
- EN/IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity Test
- EN/IEC 61000-4-4 Electrical Fast Transient/Burst Immunity Test
- EN/IEC 61000-4-5 Surge Immunity Test
- EN/IEC 61000-4-6 Immunity to Conducted Disturbances, Induced Radio-Frequency Fields
- EN/IEC 61000-4-8 Power Frequency Magnetic Field Immunity Test
- EN/IEC 61000-4-9 Pulse Magnetic Field Immunity Test
- EN/IEC 61000-6-1 Generic Standards Immunity for Residential, Commercial & Light-Industrial Environments
- EN/IEC 61000-6-2 Generic Standards Immunity for Industrial Environments
- EN/IEC 61000-6-3
- Page 2 of 4Generic Standards Emission Standard for Residential, Commercial & Light Industrial Environments
- EN/IEC 61000-6-4 Generic Standards Emission Standard for Industrial Environments
- ETSI EN 300 328 SRD Short Range devices 1GHz to 25 GHz
- ETSI EN 300 330-1 Electromagnetic compatibility and Radio spectrum
- Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods
- ETSI EN 300 330-2 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
- FCC 47 CFR Part 15 Radio Frequency Devices
- FCC 47 CFR Part 18 Industrial, scientific, and medical equipment
- FCC 47 CFR Part 68 Connection of Terminal Equipment to the Telephone Network
- FCC 47 CFR Part 90 Private Land Mobile Radio Services
- ICES-001 Interference-Causing Equipment Standard: Industrial, Scientific and Medical (ISM) Radio Frequency Generators
- ICES-003 Interference-Causing Equipment Standard: Digital Apparatus
- IEC 60601-1-2 Medical Electrical Equipment- Part 1-2: General Requirements for Basic Safety and Essential Performance
- Collateral Standard: Electromagnetic Compatibility Requirements and Tests
- IEC 61326-1 Electrical Equipment for measurement, Control and Laboratory Use EMC Requirements Part 1: General Requirements
- IEC 61326-2-1 Electrical Equipment for Measurement, Control and
- Laboratory use EMC Requirements Part 2-1: Particular Requirements
- IEC 61326-2-2 Electrical Equipment for Measurement, Control and
- Laboratory use EMC Requirements Part 2-2: Particular Requirements
- RSS 119 Radio Transmitters and Receivers Operating in the Land
- Mobile and Fixed Services in the Frequency Range 27.41-960 MHz
- RSS 133 2 GHz Personal Communications Services
- RSS 134 900 MHz Narrow band Personal Communication Service
- RSS 195 Wireless Communications Service Equipment Operating in the Bands 2305-2320 MHz and 2345-2360 MHz
- RSS 210 Radio Standard Specification: Low Power License-Exempt Radio communication Devices
- RSS 213 2 GHz License-exempt Personal Communications Service Devices (PCS)
Telecommunications
- Radio Standards Specification
- RSS-Gen Spectrum Management and Telecommunication Policy
- Radio Standard Specification: General Requirements and Information for the Certification of Radio Communication Equipment
Founded in 1994 by a group of experienced certification and testing experts, QAI is an independent third-party testing, inspection and certification organization which serves the building industry, government and individuals with cost effective solutions through our global, in-house capabilities / services.
Latest News
Contact
USA 1(888) 540.4024
Canada 1(877) 461.8378
Europe info@qai.org
China china-info@qai.org
S Korea asia-info@qai.org