International Fireproof Technology Inc (IFTI)
Building Products Listing Program
- International Fireproof Technology Inc (IFTI)
- Applied Fireproofing
- Irvine, CA
- B1117-2
- B1117, Edition 3
- August 23, 2018
- May 31, 2024
- N/A
-
ASTM E84 “Standard Test Method for Surface Burning Characteristics of Building Materials”.
ASTM E84 “Standard Test Method for Surface Burning Characteristics of Building Materials”, Extended 20 minutes.
ASTM E2768 “Extended Duration Surface Burning Characteristics of Building Materials (30 Min Tunnel Test) “.
ASTM E119 “Standard Test Method for Fire Tests of Building Construction and Materials”.
CAN/ULC S101 “Standard Methods of Fire Endurance Tests of Building
Construction and Materials.”CAN/ULC S102 “Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.”
NFPA 286 “Standard Methods of Fire Tests Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth”.
CAN/ULC-S145 “Standard Method of Test for the Evaluation of Protective
Coverings for Foamed Plastic Insulation – Full-Scale Room Test.” -
DC315 Intumescent Coating.
-
Description: DC315 is an intumescent coating used as an interior ignition or thermal barrier coating (Per International Building Code 2021) for application over spray polyurethane foam (SPF) Insulation. DC315 may be produced in the following colors: White, Ice Gray, Dark Gray and Charcoal Black..
Uses: DC315 is an ignition and thermal barrier coating (Per International Building Code 2021) for application to spray polyurethane foam (SPF) insulation. DC315 is a water based latex product. DC315 is typically applied with a paint sprayer, brush or roller.
See manufacturers published installation instructions for application details.Markings:
Product is marked with labels or stamp supplied by IFTI to each container. The markings include:
• Manufacturer’s name, trademark, or other recognized symbol of identification,
• Product name,
• QAI File Number: B1117,
• Date of manufacture or date code on the label or stamp,
• ASTM E84 (ASTM E2768) Flame Spread Index / Smoke Developed Index
• QAI logo shown here:
-
Please refer to the listing document link at the top of the page for Models and Ratings
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea