USA 888.540.4024 CANADA 877.461.8378

Listing Directory

Home directory Amvic Corporation

« Return to Building Products Directory

Download Listing Doc

Amvic Corporation

Building Products Listing Program

Customer:

Amvic Corporation
Class:

Thermal Insulation – Foam Plastic
Location:

501 McNicoll Avenue, Toronto, Ontario, M2H 2E2 Canada
Website:

www.amvicsystem.com
Listing No.:

B1061-3
Project No.:

B1061-3
Effective Date:

December 15, 2020
Last Revised Date:

December 15, 2020
Expires:

N/A

Standards:

CAN/ULC S701.1	Thermal Insulation, Polystyrene, Boards and Pipe Covering.
CAN/ULC S102.2	Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies.
ASTM C578	Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation.
UL 723	Standard for Test for Surface Burning Characteristics of Building Materials.

Product:

Amvic SilveRboard Expanded Polystyrene (EPS) Thermal Insulation in the Following Types:
• SilveRboard XS 0.7
• SilveRboard Type 1, Type 2, Type 3 (Type I, II, IX)
Markings:

Products are marked in a permanent manner on the backside of each panel with the following:
a) Company Name: Amvic Corporation
b) CAN/ULC S701.1 / ASTM C578 Type as appropriate
c) CAN/ULC S102.2 Flame Spread Smoke Developed Index (FSI ≤ 250 / SDI ≥ 500)
d) ASTM E84 Flame Spread Smoke Developed Index (FSI ≤ 25 / SDI ≤ 450)
e) Traceability code including date of manufacture.
f) QAI Mark as shown below:

Labels are applied to palletized finished products to ensure visibility on the jobsite.
Ratings:

Please refer to the Listing Document Link at the top of the page for Ratings

Note:
The product must be installed in accordance with the code enforced by the authority having jurisdiction. Final acceptance of the product in the final installation is subject to inspection by the authority having jurisdiction.

The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.