USA 888.540.4024 CANADA 877.461.8378

Listing Directory

Home directory DRAGEAU SARL

« Return to Plumbing Directory

Download Listing Doc

DRAGEAU SARL

Plumbing Listing Program

Customer:

DRAGEAU SARL
Class:

Plumbing Fixtures
Location:

Ensisheim, France
Listing No.:

P380
Project No.:

P380, Edition 3
Effective Date:

January 21, 2023
Last Revised Date:

October 30, 2025
Expires:

N/A
Standards:

ASTM A182/A182M-21 – Standard Specification for Forged or Rolled Alloy and Stainless-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High Temperature Service
Product:

Drag’eau Sludge Eliminator Products
Markings:

Products are marked in a permanent manner where it is readily visible after installation with the following:
a)Manufacturer’s name or trademark
b)Model number or model designation
c)Date of manufacture
d)QAI file number: P380
e)The standard “ASTM A182/A182M-1”
f)QAI logo shown here:

Models:

Table 1, ASTM A182/A182M-1 Fittings

MODEL No.¹	Connection	Nominal Connection Size (mm/(in)) ³	Diameter (mm)	Length (mm)	Rated Flow (lpm)²
DSi-20	ISO thread	20 (3/4)	45	100	20
DS-i20C	NPT thread	20 (3/4)	45	100	20
DSi-25	ISO thread	25 (1.0)	60	119	73
DS-i25C	NPT thread	25 (1.0)	60	119	73
DSi-32	ISO thread	32 (1.25)	68	145	95
DS-i32C	NPT thread	32 (1.25)	68	145	95
DSi-40	ISO thread	40 (1.5)	85	160	158
DS-i40C	NPT thread	40 (1.5)	85	160	158
DSi- 50	ISO thread	50 (2.0)	95	170	292
DS-i50C	NPT thread	50 (2.0)	95	170	292
DSi-50b	ISO flange	50 (2)	95	170	292
DS-i50bC	ANSI flange	50 (2)	95	170	292
DSi-65	ISO flange	65 (2.5)	110	255	483
DS-i65C	ANSI flange	65 (2.5)	110	255	483
DSi-80	ISO flange	80 (3.0)	130	280	697
DS-i80C	ANSI flange	80 (3.0)	130	280	697
DSi-100	ISO flange	100 (4)	150	365	1517
DS-i100C	ANSI flange	100 (4)	150	365	1517
DSi-150	ISO flange	150 (6)	180	410	5000
DS-i150C	ANSI flange	150 (6)	180	410	5000
DSi-200	ISO flange	200 (8)	250	460	8500
DS-i200C	ANSI flange	200 (8)	250	460	8500

Note 1: These fittings were evaluated for compliance with ASTM A182/A182M, no evaluation was conducted on the fittings ability to ” Eliminate Sludge”
Note 2: this rating is based on the manufacturers claim.
Note 3: All fittings are rated by the manufacturer for a temperature of -20C to 155C and a maximum of 1500 Kpa (217 psi)

The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.

The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.

No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.

Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.