CSA A277 “Procedure for certification of prefabricated buildings, modules, and panels”

With reference to:
Ontario Building Code
Ontario Building Code – Part 7 Plumbing
Ontario Electrical Safety Code

Note: Unless otherwise specified, the Standards/Codes noted are the most current versions in effect.

Modular Home

All markings must be permanent and visible after installation.
The QAI label (item 1067, white lettering on black background with gold border, 3-1/2” diameter). Normally located in close proximity to the electrical panel.
•Certification label serial number
•QAI Certification logo with the “c” identifier
•“Modular Homes”

QAI Logo shown here:

The CSA A277 Specification Nameplate (item 1068, black lettering on white background, 8-1/2” x 14”) is normally located near the electrical panel and includes:
•Manufacturer’s name and address
•Date of manufacture
•Model Serial Number or Product Code
•Foundation Type (perimeter foundation wall or piers)
•Floor Live Load
•Specified Snow Load (1/50)
•Seismic Response Sa (0.2)
•Hourly Wind Pressure (1/50)
•Building Envelope Effective Thermal Resistance
•Windows/Doors/Skylights Thermal Characteristics
•Outside Design Temperature (Heat Loss or Heat Gain)
•Factory Installed Appliances
•Site Installed Components, Assemblies, and Systems
•Electrical Systems Voltage, Frequency, and Amperage
•Code(s) and standard(s) with edition date or version in which the structures have been constructed to

Homes:
Single Family Dwellings classified under one major occupancy (Group C – Residential), constructed in single or multiple modules up to a maximum of 1 storey. Modular homes under this scope have a building area not exceeding 600m².

Residential buildings are designed and constructed within the limitations of Part 9 of the applicable Building Code without vertical / horizontal fire and sound separations. This listing does not include multi-unit residential buildings requiring fire and sound separation or shared egress facilities, such as duplexes, row houses, townhouses, hotels and motels, and/or any buildings designed with multiple major occupancies.

For a full list of structures covered under Group C occupancy, please refer to Division B, Notes to Part 3, A-3.1.2.1.(1) Major Occupancy Classification in the applicable building code.

Structural:
Wood Frame Construction

Electrical Ratings:
120/240V, 60Hz, 125A max, 1 Phase

Heating/Ventilation:
Units are equipped with electric heating system and energy recovery ventilator

Plumbing:
Conventional drain and vent system to a maximum of 240 hydraulic fixture units.

Gas Systems:
None

Sprinkler System:
None

Notes:
Modular Homes included in this listing are manufactured at a central facility and transported to the site. These modules must include provisions for on-site interconnections, connection to municipal services (water and sewage) and electrical power supply. QAI certification covers the construction of the modular homes including any factory installed plumbing and electrical services, appliances, equipment and fixtures. QAI certification is intended to obviate the necessity of further inspection by the local regulatory authorities except for site connections to services or to other modules and for site installed features. Site installation of products must be done according to the manufacturer’s installation instructions and in compliance with the requirements set by the local Authority Having Jurisdiction.