Cool Master Refrigeration Inc.
Building Products Listing Program
- Cool Master Refrigeration Inc.
- Insulated Metal Panels
- Concord, Ontario Canada
- B1158
- B1158-1 Edition 1
- May 2, 2025
- May 2, 2025
- N/A
-
ASTM C518-17
“Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus”. -
Cool Master Insulated Metal Panels (IMP) for walk-in coolers and freezers of the following types:
•Cool Master Continuous Panel
•Cool Master Camlock Panel -
Each panel is marked with a permanent label containing the following information:
a) Manufacturer’s name or trademark
b) Product type
c) Production date
d) Panel thickness requirements
e) QAI file number: B1158
f) QAI logo with ‘c’ identifier
-
Cool Master Continuous and Camlock IMPs have the following thermal resistivity and minimum thickness required for compliance with National Resources Canada (NRCan) Energy Efficiency Regulation requirements when evaluated per ASTM C518 for applications noted.
Model
Application
Thermal Resistivity
m*K/W (hr*ft2*oF / BTU*in)
Minimum Panel Size
Thickness
mm (inches)
Thermal Resistance
m²·K/W (hr·ft²·°F/BTU)
Continuous Panel
Cooler 12.8°C (20°F)
53.11 (7.66)
89 (3.5)
4.72 (26.81)
Freezer -6.7°C (20°F)
63.30
(9.13)
95 (3.75)
6.04 (34.24)
Camlock Panel
Cooler 12.8°C (20°F)
51.49
(7.43)
89 (3.5)
4.59 (26.01)
Freezer -6.7°C (20°F)
58.58
(8.45)
102 (4.0)
5.95 (33.80)
Note 1: Evaluation was conducted in accordance with 10 CFR-2017, Part 431, Subpart R, Appendix B
Notes:
Products must be installed with the manufacturer’s published installation instructions and in accordance with the building codes recognized by the authority having jurisdiction.Listed manufacturers are subject to on-going inspections by QAI to ensure that the products outlined above remains as it is listed.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea