Specified Technologies Inc.
Building Products Listing Program
- Specified Technologies Inc.
- Penetration Firestopping
- Somerville New Jersey, 08876 USA
- F505
- F505-1
- February 13, 2025
- February 13, 2025
- N/A
-
CAN/ULC S115-2023
Standard Method of Fire Tests of Firestop Systems.
ASTM E814-13a (2017)
Standard Test Method for Fire Tests of Penetration Firestop Systems.
-
Specified Technologies Inc. (STI) firestopping products of the following model(s):
• SpecSeal® LCI Intumescent Sealant
• SpecSeal® SBR Firestop Block -
Label on sealant and firestop block from the manufacturing facility shall include the following information:
a)Manufacturer’s name or trademark.
b)Product name
c)Traceability / batch code
d)QAI Listing Number (F505)
e)QAI logo with ‘C’ and ‘US’ indicator as shown below:
-
STI firestopping products have the following fire-resistance ratings evaluated per the noted standard(s):
QAI DESIGN:
MODEL
SUBSTRATE
PENETRANT
APPROVED INSTALL
RATING MINUTES
ASTM E814
CAN/ULC S115
F
T
F
T
H
Specseal® LCI Sealant
Minimum 114 mm (4.5’’) Concrete
Maximum 38 mm (1.5’’) PVC Pipe
Floor / Ceilings
Walls
120
45/601
120
45/601
120
Specseal® SBR Block
Minimum 114 mm (4.5’’) Concrete
Maximum 51 mm (2’’) PEX Pipe
Floor / Ceilings
Walls
120
–
120
–
120
1: 60 minute T-rating requires packing material of mineral fiber, glass fiber, or ceramic fiber batt material types.
Notes:
Product is to be installed in accordance with the QAI Design Listing noted above and manufacturer’s published installation instructions by qualified installing personnel.
Listed manufacturers are subject to on-going inspections by QAI to ensure that the products outlined above remains as they are listed.
Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea