CAN/CSA C22.2 No. 61010-1-12 (R2022) – Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use –
Part 1: General Requirements

UL 61010-1:2012 (3rd Ed.) – Electrical Equipment for Measurement, Control, and Laboratory Use; Part1: General Requirements

Family of High Voltage Power Supplies for X-ray Systems

Products are marked in a permanent manner where it is readily visible after installation with the following:

a) Manufacturer’s name or trademark
b) Model designation
c) Month and year of manufacture
d) Product ratings: voltage, frequency, and input in amps
e) QAI file Number: E11467-2
f) The wording “CAN/CSA C22.2 No. 61010-1-12 and UL 61010-1”
g) QAI logo shown here:

Model Series XXXXXX-aaa/b.bb-cc_YYY_ZZZZZ

Product Rating(s):
• 220-240 Vac; 50/60 Hz; 2 A (auxiliary input),
• 220-240 Vac; 50/60 Hz; 2W+2N+PE; 2×16 A (main input model with two PowerCell) or
• 220-240 Vac; 50/60 Hz; W+N+PE; 16 A (main input model with one PowerCell), class I unit.

Products Covered:

High Voltage Power Supplies, HIGH VOLTAGE POWER SUPPLIES
Model name: XXXXXX-aaa/b.bb-cc_YYY_ZZZZZ, where
• XXXXXX- can be any alphanumeric character or blank and describes non safety relevant information like customer name or description (e.g.iVario, MGi, or EBP,etc.).
• aaa shows output voltage in kVd.c. and can be 100/160/225/320/450.
• b.bb shows output power in kW and can be 0.5 or 2.25 or 4.5.
• -ccc suffix -T or -MF or blank. Showing Certification and/or CE relevant marking.
• _YYY can be any alphanumeric character or blank and describes non safety relevant information like evolution code or SW revision number,etc.
• _ZZZZZ can be any alphanumeric character or blank and describes non safety relevant information like application, region etc.
• XXXXXX-170/1.8-cc_yyy_ZZZZZ, XXXXXX-500/1.5-cc_yyy_ZZZZZ, XXXXXX-225/0.5MF- cc_yyy_ZZZZZ
• XXXXXX-450/1.0MF-cc_yyy_ZZZZZ.
• XRG-aaa/b.bb_YYY_ZZZZZ was used until 2016 and then was changed to iVARIO-aaa/b.bbcc_
• YYY_ZZZZZ due to marketing.

These are high voltage power supplies for x-ray and ebeam systems.

Model Differences: 

NOMENCLATURE:

Model name: XXXXXX-aaa/b.bb-cc_YYY_ZZZZZ, where
• XXXXXX- can be any alphanumeric character or blank and describes non safety relevant information like customer name or description (e.g.iVario, MGi, or EBP,etc.).
• aaa shows output voltage in kVd.c. and can be 160/225/320/450.
• b.bb shows output power in kW and can be 0.5 or 2.25 or 4.5.
• -ccc suffix -T or -MF or blank. Showing Certification and/or CE relevant marking.

• _YYY can be any alphanumeric character or blank and describes non safety relevant information like evolution code or SW revision number,etc.
• _ZZZZZ can be any alphanumeric character or blank and describes non safety relevant information like application, region etc.
• Rev 2.0: Additionally, following models are also tested and fully covered by this report.
• -XXXXXX-170/1.8-cc_yyy_ZZZZZ.
• XRG-aaa/b.bb_YYY_ZZZZZ was used until 2016 and then was changed to iVARIO-aaa/b.bbcc_
• YYY_ZZZZZ due to marketing.

Rating: 220-240 Vac, 50/60 Hz, 2 A (auxiliary input), 220-240 Vac, 50/60 Hz, 2W+2N+PE, 2×16 A
(main input model with two PowerCell) or 16 A (main input model with one PowerCell), class I unit.