CAN/ULC S104 (2015)  Standard Method for Fire Tests of Door Assemblies.
UL 10B (2024)   Fire Tests of Doors Assemblies.

1) AJ-CO – Center Parting Elevator Door Assembly
2) AJ-2SSS – 2-Speed Elevator Door Assembly
3) AJ-SSSS – Single Speed Elevator Door Assembly

See:  FD001 – Fire Door Labeling requirements

90-MINUTE FIRE RATED ELEVATOR DOOR ASSEMBLIES

Limitations:
• Hardware: Door operating unit and associated electrical hardware shall be fire rated or listed for use in fire-rated assemblies by an approved agency.
• Rollers: Component must be a GAL Type “A” sheave with top safety retainer and steel wheel with a nylon coating along the contact surface, or equivalent.
• Track: Component must be a GAL MONTX track/operator or equivalent.
• Door Gibs: Stainless steel or equivalent.

Each product of A&J Sheet Metal Inc. is ink stamped with the following information:
• QAI Logo with “c” and “us” indicators.
• Manufacturer’s name or trademark.
• Country of manufacture.
• QAI file number (F509-1).
• Traceability information.
See FD001 – Fire Door Labeling requirements

Notes :
Refer to QAI evaluation report F509-1 and the applicable test reports for test assembly configurations used for fire endurance testing.
Refer to the QAI FD002 – Fire Door Guidelines for general guidelines of fire door assemblies
Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction (AHJ).
Product is to be installed in accordance with the manufacturer’s published installation instructions by qualified installing personnel.