AL13 Architectural Systems
Building Products Listing Program
- AL13 Architectural Systems
- Exterior Cladding
- Delta, British Columbia, Canada
- B1120-1
- B1120-1
- March 31, 2019
- March 24, 2021
- N/A
-
CAN/ULC S134 Standard Method of Fire Test of Exterior Wall Assemblies.
CAN/ULC S102 Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.
NFPA 285 Standard Fire Test Method for Evaluation for Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components.
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
-
AL13 Aluminum Composite Panels (ACP) of the following types:
1. FR Panels.
2. FR-1 Panels. -
Each panel is marked with a permanent label containing the following information:
a) Manufacturer’s name or recognized trademark, AL13.
b) Product name.
c) Batch Number.
d) Date of Manufacture: Year/Month/Day.
e) QAI file number: B1120
f) CAN/ULC S102 / ASTM E84 Flame Spread Index and Smoke Developed Indices as noted in this listing.
g) QAI logo shown here:
-
AL13 EXTERIOR WALL ASSEMBLY CAN/ULC S134 QAI Design # PRODUCT Heat Flux at 3.5 m Flame Spread (meters) Maximum Thickness (mm) Conditions of Use B1120-1a FR Panel ≤ 35 kW/m2 < 5.0 4 Installation to be in accordance with QAI Design B1120-1a AL13 ACP surface burning characteristics determined in accordance with CAN/ULC-S102:
AL13 CAN/ULC S102 Ratings Model(s) Flame Spread Index Smoke Developed Index Maximum Thickness (mm) FR ≤ 25 ≤ 50 4 FR-1 ≤ 25 ≤ 50 4 AL13 ACP used as cladding on exterior wall assemblies as described below have met the requirements of NFPA 285:
AL13 NFPA 285 Compliant Exterior Wall Assemblies QAI Design # Model(s) Maximum Thickness Conditions of Use B1120-1b FR-1 0.16’’ (4mm) Installation to be in accordance with QAI Design B1120-1b AL13 ACP surface burning characteristics determined in accordance ASTM E84:
AL13 ASTM E84 Surface Burning Characteristic Ratings Model(s) Flame Spread Index Smoke Developed Index Maximum Thickness (mm) FR ≤ 25 ≤ 50 4 FR-1 ≤ 25 ≤ 50 4
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea