Artsy Contracting Co. Ltd.
Windows & Doors Listing Program
- Artsy Contracting Co. Ltd.
- Fire Doors
- Delta, BC
- June 16,2017
- June 16,2017
CAN/ULC-S104 Standard Method for Fire Tests of Door Assemblies.
20 min Rated Fire Doors
- See : FD001-Fire Door Labeling requirement
20-MINUTE WOOD CORE PANEL DOORS:
Minimum 44 mm (1-3/4”) Thickness
Swing Type Maximum Dimensions Panel Type Latching Width Length Single Swing 950 mm(3’0″) 2750 mm(9’0″) Flush
(Mortised or Cylindrical)
1250mm(4’0″) 2450 mm(8’0″)
Limitations :(Review Machining Report for further detail)
• Cylindrical Latches (Listed and Labelled)
• Mortise Lockset (Listed and Labelled)
o Assa Abloy Hospitality AS – Vingcard Mortise Hardware
▪ “VingCard Alu” or “Trio VingAccess Alu”, Series 1050, 1060, 1070, 1080,1090
▪ 1000 Series; Models 1001, -02, -04, -07, -12, -14, -15,-57,-85 with 19.05 mm (3/4 in.) latch bolts; may include suffix letters -K, KVC, -L or LVC
▪ “3000 DaVinci, Euro DaVinci and Presidio” battery operated units
▪ “Signature Series, Euro, ANSI and US ANSI” battery operated units
▪ “Allure Series, Euro, ANSI and US ANSI” battery operated units ▪ “Essence Series, Euro, ANSI (DB) and US ANSI (DA)” battery operated units
• Deadbolts (Listed and Labelled)
• Viewers (Listed and Labelled)
• Surface Mounted Door Closer (Listed and Labelled)
• Glass Lights (Listed and Labelled)
o Maximum area of exposed glass per door leaf is 0.064 m2 (Max. width of 255 mm, Max. height of 635 mm).
• Surface Mounted Door Bottom (Listed and Labelled)
• Surface Mounted Protection Plates
Refer to QAI evaluation report F445-1 and the applicable test reports for test assembly configurations used for fire endurance testing.
Refer to the QAI FD002 - Fire Door Guidelines for general guidelines of fire door assemblies
Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction (AHJ).
Product is to be installed in accordance with the manufacturer’s published installation instructions by qualified installing personnel.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to firstname.lastname@example.org. Please include the listing number in the request.