California Department of Corrections (CDCR)
Windows & Doors Listing Program
- California Department of Corrections (CDCR)
- Fire Door Assembly - Positive Pressure
- Corcoran, California
- F421-1
- November 3, 2014
- November 3, 2014
- N/A
-
UL 10 (c) Fire Tests of Door Assemblies NFPA-252 Standard Methods of Fire Tests of Door Assemblies -
90 min Rated Fire Door Assemblies
-
Single Swing Door Assembly:
Assembly 6: Overall Size:
3’4” wide by 7’5” high
Slab: Maximum Slab Size:
3’0” wide by 7’0” high
Minimum Slab Thickness:
1-3/4”
Skin:
14 guage
Reinforcement:
1-1/2” x 1-1/2” x 1/8” tube steel vertical reinforcement
Vision Panel:
Maximum Size:
11-3/4” x 11-3/4”
Glazing:
¾” thick – Fire Rated Wired Glass
Edge Sealing:
¾” wide x 1/8” thick intumescent seal around the perimeter of the glazing
Frame: Material:
Metal
Gauge:
12 guage
Door Assembly – Single Swing Door with Window extensions on either side:
Assembly 7: Single swing door assembly with side windows extensions. The window frames are welded to the door frame. The window extension assemblies on either side line up with the top of the door.
Overall Height:
7’5”
Top Width:
9’0”
Bottom Width:
3’4”
Extension Window Height:
4’2” (maximum)
Slab: Maximum Slab Size:
3’0” wide by 7’0” high
Minimum Slab Thickness:
1-3/4”
Skin:
14 guage
Reinforcement:
1-1/2” x 1-1/2” x 1/8” tube steel vertical reinforcement
Vision Panel:
Size:
11-3/4” x 11-3/4”
Glazing:
¾” thick – Fire Rated Wired Glass
Edge Sealing:
¾” wide x 1/8” thick intumescent seal around the perimeter of the glazing
Door Frame: Material:
Metal
Gauge:
12 Gauge
Type 2 – Window Extension:
Maximum Window Extension Size:
2’8” wide by 4’2” high
Frame:
12 Gauge Steel
Maximum Glazing Size:
7” x 46”
Glazing Type:
Listed Glazing
Type 3 – Window Extension: Maximum Window Extension Size:
3’0” wide by 4’0” high
Frame:
12 Gauge Steel
Mullions:
12 Gauge Steel
Maximum Glazing Size:
30” x 46”
Glazing Type:
Listed Glazing
-
Refer to QAI evaluation report F421-1 and the applicable test reports for test assembly configurations used for fire endurance testing.
Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction (AHJ).
Refer to the QAI - Fire Door Guidelines
Product is to be installed in accordance with the manufacturer’s published installation instructions by qualified installing personnel.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 1(888) 540.4024
Canada 1(877) 461.8378
Europe 
China 
S Korea