CertainTeed Canada, Inc.
Building Products Listing Program
- CertainTeed Canada, Inc.
- Batt (Blanket) Insulation Blown Insulation
- Mississauga, ON
- B1159
- B1159-1, Edition 2
- January 29, 2025
- May 28, 2025
- N/A
-
CAN/ULC S702.1:21
Standard for Mineral Fibre Thermal Insulation for Buildings, Part 1: Material Specification.
CAN/ULC S102:18
Standard Method of Test for Surface Burning Characteristics of Buildings Materials and Assemblies.
CAN/ULC S102.2:18
Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Covering and Miscellaneous Materials.
CAN/ULC S114:18
Standard Method of Test for Determination of Non-Combustibility in Building Materials.
-
CertainTeed Lanaé Sustainable Insulation™ – Fibreglass Batt Insulation
CertainTeed Lanaé NoiseReducer™ – Fibreglass Batt Insulation
CertainTeed Ultratherm™ – Fibreglass Blown Insulation -
Product bags contain labeling with the following information:
a) Manufacturer’s name and manufacturing location.
b) Product name.
c) CAN/ULC S702.1 Type, as appropriate.
d) CAN/ULC S114 Non-Combustible.
e) Flame Spread Index = 0 & Smoke Developed Index = 0, per CAN/ULC S102
f) Thermal Resistance for product.
g) Traceability code.
h) QAI logo shown here: -
The following outlines CertainTeed Lanaé Sustainable Insulation™ and NoiseReducer™ batt insulation, and Ultratherm™ blown insulation performance determined in accordance with the noted standards.
CertainTeed batt products, Lanaé Sustainable Insulation™ and Lanaé NoiseReducer™ products comply for use as Type 1 Insulation, classified in accordance with CAN/ULC S702.1, with the following thermal resistance values as outlined below:
PRODUCT
CAN/ULC 702.1
Type 1 – Batt Insulation
RSI (m2*K/W)
R-VALUE (ft2*oF*hr/Btu)
Lanaé Sustainable Insulation™
1.4
8
1.8
10
2.1
12
2.5
14
3.5
20
3.9
22
4.0
22.5
4.2
24
4.9
28
5.5
31
6.2
35
7.0
40
Lanaé NoiseReducer™
1.4
8
2.1
12
3.5
20
CertainTeed product, Ultratherm™, for use as Type 5 Blown Insulation, classified in accordance with CAN/ULC S702.1, with the following thermal resistances values as outlined below:
CAN/ULC 702.1
CertainTeed Ultratherm™
Type 5 – Blown InsulationThermal Resistance
Minimum
Installed ThicknessMinimum
DensityRSI (m2*K/W)
R-VALUE (ft2*oF*hr/Btu)
(mm)
(in)
(kg/m3)
(lb/ft3)
2.1
12
115
4.5
14.8
0.93
5.6
32
293
11.5
15.9
0.99
9.8
56
491
19.3
17.1
1.07
14.1
80
677
26.6
18.2
1.13
CertainTeed batt products, for use as Type 1 Insulation, classified in accordance with CAN/ULC S702.1, with the following surface burning characteristics per CAN/ULC S102:
PRODUCT
DENSITY
RANGE
(kg/m3)
MAXIMUM THICKNESS
(mm)
FLAME SPREAD INDEX (FSI)
SMOKE DEVELOPED INDEX
(SDI)
Lanaé Sustainable Insulation™
12 – 23
305
0
0
Lanaé NoiseReducer™
12 – 23
305
0
0
CertainTeed product, Ultratherm™, for use as Type 5 Blown Insulation, classified in accordance with CAN/ULC S702.1, with the following surface burning characteristics per CAN/ULC S102.2:
PRODUCT
DENSITY
RANGE
(kg/m3)
MAXIMUM THICKNESS
(mm)
FLAME SPREAD INDEX (FSI)
SMOKE DEVELOPED INDEX
(SDI)
Ultratherm™1
≥ 14.7
N/A
0
0
Note 1: Product is not limited in thickness for surface burning characteristics rating shown.
CertainTeed Type 1 and Type 5 Thermal Insulation products classified as non-combustible per CAN/ULC S114:
PRODUCT
DENSITY
RANGE
(kg/m3)
CLASSIFICATION
Lanaé Sustainable Insulation™
12 – 23
Non-Combustible
Lanaé NoiseReducer™
12 – 23
Non-Combustible
Ultratherm™
≥ 14.7
Non-Combustible
Notes:
Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.