Custom Elevator Interiors
Building Products Listing Program
- Custom Elevator Interiors
- Fire Doors
- Jupiter, Florida
- F501
- F501 Edition 1
- March 11, 2025
- March 11, 2025
- N/A
-
UL 10B (2020)
Fire Tests of Door Assemblies.CAN/ULC-S104 (2020)
Standard Method for Fire Tests of Door Assemblies. -
•90-Minute Fire-Resistance Rated Center Parting Elevator Door Assembly.
•90-Minute Fire-Resistance Rated 2-Speed Elevator Door Assembly.
•90-Minute Fire-Resistance Rated Single Speed Elevator Door Assembly. -
Each product of Custom Elevator Interior is ink stamped with the following information:
•QAI Logo with “c” and “us” indicators.
•Manufacturer’s name or trademark.
•Country of manufacture.
•QAI file number (F501-1).
•Traceability information.See FD001 – Fire Door Labeling requirements
Notes:
Refer to QAI evaluation report F501-1 and the applicable test reports for test assembly configurations used for fire endurance testing.Refer to the QAI FD002 – Fire Door Guidelines for general guidelines of fire door assemblies
Final acceptance of the product in the intended application is to be determined by the authority having jurisdiction (AHJ).
Product is to be installed in accordance with the manufacturer’s published installation instructions by qualified installing personnel.
-
Product
Maximum width
in (mm)
Maximum Height
in (mm)
fire rating achieved minutes
Frame
46 (1168)
86 (2184)
90
Center Parting Elevator Door Assembly
21.75 (552)
84.5 (2416)
2-Speed Elevator Door Assembly
Largest Leaf
21.75 (552)
Single Speed Elevator Door Assembly
48 (1219)
Leaf Must Exceed Opening Size
· Rollers: Component must be a GAL Type “A” sheave with top safety retainer and convex steel wheel with a nylon coating along the contact surface, or equivalent.
· Track: Component must be a GAL MONTX track/operator or equivalent.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea