Gestion Etoc Inc.
Factory Built Structures Listing Program
- Gestion Etoc Inc.
- Business Commercial Industrial Structures – For Electrical Features Only
- Lachine, Québec
- June 17, 2020
- June 17, 2020
CSA A277 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”
CSA C22.10 Québec Construction Code, Chapter V – Electricity (CSA C22.1 Canadian Electrical Code, Part I, “Safety Standard for Electrical Installations” with Quebec amendments)
Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.
Business Commercial Industrial Structures – For Electrical Features Only
All markings must be permanent and visible after installation.
1. The QAI label (item 1069 – black lettering with silver background) is normally located in close proximity to the electrical panel.
QAI logo shown here:
2. The specification nameplate (item 1070, 8-1/2” x 7” size) is located in close proximity to the electrical panel and includes:
− Manufacturer’s Name and Address
− Date of Manufacture
− Model Serial Number or Product Code
− Factory Installed Appliances
− Site Installed Components, Assemblies, and Systems
− Electrical Systems Voltage, Frequency, and Amperage
Other Markings as required by the relevant codes.
The QAI label and specification nameplate are available from QAI and must be applied at the factory.
The scope of prefabricated buildings covered in this listing include:
Modular structures comprised of single and multiple sections. This listing category
includes the certification of electrical service only. This listing category does not
include structural design, plumbing or gas systems, nor other systems other than
Up to a maximum of 120/240V, 60Hz, 100A
Modules included in this listing are manufactured at a central facility and
transported to the site. These modules include provisions for on-site
interconnections and connection to electrical power supply. QAI certification
covers any factory installed electrical services, equipment and fixtures. QAI
certification is intended to obviate the necessity of further inspection by the local
regulatory authorities except for site connections to services or to other modules
and for site installed features.
Notes: Interconnection of modules and connection to services must be finished on site
as specified in the electrical permits and are subject to inspection from the local
authorities having jurisdiction.
Structures shall be installed under permit in accordance with the codes enforced
by the authority having jurisdiction.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to firstname.lastname@example.org. Please include the listing number in the request.