Grandeur Housing Ltd.
Factory Built Structures Listing Program
- Grandeur Housing Ltd.
- Mobile Relocatable Commercial Industrial Structures
- Winkler, Manitoba
- July 30, 2010
- March 22, 2017
CSA A277 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”
CSA C22.1-09 Safety Standard for Electrical Installations
CSA B149.1 -10 ”Natural Gas and Propane Installation Code”
National Building Code of Canada 2010 (Part 9)
Alberta Building Code 2006 (Part 9 and 10)
National Plumbing Code of Canada 2010
The standards above as provincially amended by Alberta, Manitoba,
and Saskatchewan. Jurisdictions may require structures to comply with
municipal and/or provincial codes and standards in lieu of the national
codes and standards.
Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.
Mobile Relocatable Commercial Industrial Structures
Products are labelled and marked in a permanent manner where it is
readily visible after installation with the following information:
1. The specification nameplate (item 1068, white with black, 8-
1/2” x 14”) is located in close proximity to the electrical panel
• Manufacturer’s Name and Address
• Date of Manufacture
• Model Serial Number or Product Code
• Foundation Type (Perimeter Foundation Wall or Piers)
• Floor live Load
• Specified Snow Load (1/50)
• Seismic Response Sa(0.2)
• Hourly Wind Pressure (1/50)
• Envelope Effective Thermal Resistance
• Windows/Doors/Skylights Thermal Characteristics
• Outside Design Temperature (Heal Loss or Heat Gain)
• Factory Installed Appliances
• Site Installed Components, Assemblies, and Systems
• Electrical Systems Voltage, Frequency, and Amperage
2. QAI label with ‘C’ identifier (Item 1093) – Relocatable
Commercial/Industrial Structures – Alberta Plumbing and Gas
Compliance Label (Alberta Part 10 Program)
3. QAI Label with ‘C’ identifier (Item 1094) – Relocatable
Commercial/Industrial Structures – Alberta Electrical Compliance
Label (Alberta Part 10 Program)
4. QAI Label with ‘C’ identifier (Item 1095) – Relocatable
Commercial/Industrial Structures – A277 Compliance Label
5. QAI logo shown here:
Relocatable commercial/Industrial structures comprised of single or
multiple modules. Group C, D, and E occupancy, in single storey
configuration and without sprinkler systems. Buildings with sleeping
accommodations have a building area not exceeding 600m2. Buildings
without sleeping accommodations have a building area not exceed
1200m2. Commercial/Industrial structures typically include but are not
limited to office space, stores, construction camp facilities such as
dormitories and dining trailers, equipment buildings, and other similar
commercial or industrial buildings.
Conventional Wood Frame Construction
120/240V, 60Hz, 200A Max.
Central Forced Air Furnaces. Units may be Electric, Natural Gas, or
LPG fired. Systems may be equipped with air conditioning.
Conventional drainage and vent systems to a maximum of 240
hydraulic fixture units.
Natural Gas or Propane
Structures included in this listing are relocatable commercial/industrial
structures manufactured at a central facility, complete with electrical
wiring, for installation or connection to other modules in the field. These
units, when completely assembled on site, are equipped with normal
facilities for connection to electrical services. QAI certification covers
the construction of the structure and any factory installed electrical
services, and is intended to obviate the necessity of further inspection
by the local regulatory authorities except for site connections to services
or to other modules and for site mounting features.
Structures bearing the QAI A277 label are built to conform to CSA standard A277, the National Building Code of Canada (Part 9), Alberta Building Code (Part 9 & 10), and/or municipal building regulations as well as the relevant plumbing, gas, and electrical codes.
Structures bearing the QAI ‘electrical features only’ label are built to conform to CSA C22.1.
Interconnection of modules, completion of structural systems and connection to services must be finished on site as specified in the electrical and building permits and are subject to inspection by the local authorities having jurisdiction.
Products are installed in accordance with the local code of the authority having jurisdiction.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI. No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing. Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to firstname.lastname@example.org. Please include the listing number in the request.