Groupe 1139 Inc.
Factory Built Structures Listing Program
- Groupe 1139 Inc.
- Modular Homes
- Drummondville, Quebec
- January 31, 2022
- January 31, 2022
CSA A277 “Procedure for Factory Certification of Prefabricated Buildings, Modules, and Panels”
Quebec Construction Code, Chapter I – Building (NBC with Quebec amendments), Part 9
National Plumbing Code of Canada
CSA C22.10 Québec Construction Code, Chapter V – Electricity (Canadian Electrical Code, Part I, “Safety Standard for Electrical Installations” with Quebec amendments)
Note 1: Unless otherwise specified, the Standards and Codes noted are the most current versions in effect.
All markings must be permanent and visible after installation.
1. The QAI label (item 1067, black with gold, 3-1/2” diameter) is normally located in close proximity to the electrical panel and includes:
− Certification label serial number
− QAI certification logo with the “C” Identifier
− “Modular Homes”
QAI logo shown here:
2. The specification nameplate (item 1068, 8-1/2” x 14” size) is located in close proximity to the electrical panel and includes:
− Manufacturer’s Name and Address
− Date of Manufacture
− Model Serial Number or Product Code
− Foundation Type (Perimeter Foundation Wall or Piers)
− Floor live Load
− Specified Snow Load (1/50)
− Seismic Response Sa (0.2)
− Hourly Wind Pressure (1/50)
− Envelope Effective Thermal Resistance
− Windows/Doors/Skylights Thermal Characteristics
− Outside Design Temperature (Heal Loss or Heat Gain)
− Factory Installed Appliances
− Site Installed Components, Assemblies, and Systems
− Electrical Systems Voltage, Frequency, and Amperage
3. Other Markings as required by the relevant codes.
Note 2: The QAI label and specification nameplate are available from QAI and must be applied at the factory.
Single family dwellings classified under one major occupancy (Group C – Residential), constructed in single or multiple modules, single storey configuration. Modular homes under this scope have a building area not exceeding 600m2.
Residential buildings are designed and constructed within the limitations of Part 9 without fire and sound separations. This listing does not include multi-residential buildings requiring fire and sound separation or shared egress facilities, hotels and motels, and/or any buildings designed with multiple major occupancies.
For a full list of structures covered under this occupancy please refer to Notes to Part 3, A-126.96.36.199.(1) Major Occupancy Classification in the National Building Code.
Conventional Wood Frame Construction within the limitations of Part 9 of the Quebec Construction Code, Chapter I – Building.
120/240V, 60Hz, 200A Max.
Primarily Electric Baseboard Heaters. Modular homes may be equipped with air conditioning.
Conventional drainage and venting systems to a maximum of 240 hydraulic fixture units.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to firstname.lastname@example.org. Please include the listing number in the request.