CSA A277 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”

Quebec Construction Code, Chapter I – Building (NBC with Quebec amendments), Part 9

CSA C22.10 Quebec Construction Code, Chapter V – Electricity (Canadian Electrical Code, Part I, “Safety Standard for Electrical Installations” with Quebec amendments)

National Plumbing Code of Canada

Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.

Business Commercial Industrial Structures

All markings must be permanent and visible after installation.

1. QAI label with ‘C’ identifier (item 1096) – black lettering with silver background) is normally located in close proximity to the electrical panel. QAI logo shown here:

2. The specification nameplate (item 1068, white with black lettering, 8-1/2” x 14”) is located in close proximity to the electrical panel and includes:
− Manufacturer’s Name and Address
− Date of Manufacture
− Model Serial Number or Product Code
− Foundation Type (Perimeter Foundation Wall or Piers)
− Floor live Load
− Specified Snow Load (1/50)

− Seismic Response Sa (0.2)
− Hourly Wind Pressure (1/50)
− Envelope Effective Thermal Resistance
− Windows/Doors/Skylights Thermal Characteristics
− Outside Design Temperature (Heal Loss or Heat Gain)
− Factory Installed Appliances
− Site Installed Components, Assemblies, and Systems
− Electrical Systems Voltage, Frequency, and Amperage

The QAI label and specification nameplate are available from QAI and must
be applied at the factory.

Structures are used for single Major Occupancy classified as Group D – Business and Personal Services occupancies, constructed in single or multiple modules in single storey configurations not exceeding 600m².

Structures under this listing typically include units used as business offices or for personal services. This listing does not include structures with multiple Major Occupancies.

For a full list of structures covered under this occupancy please refer to Appendix A, Division B of the National Building Code.

Structural:

Conventional Wood Frame Construction within the limitations of Part 9 the National Building Code.

Electrical Ratings:

120/240V, 60Hz, 200A Max.

Heating/Ventilation:

Modules may be equipped with central forced-air furnaces and air conditioning (electric only). Systems may be equipped with electrical baseboard heaters. Plumbing: Conventional drainage and venting systems to a maximum of 240 hydraulic fixture units.

Gas Systems:
None.