CSA A277-16 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”

CSA C22.10 Québec Construction Code, Chapter V – Electricity (Canadian Electrical Code, Part I, “Safety Standard for Electrical Installations” with Quebec amendments)

Note 1: Unless otherwise specified, the Standards and Codes noted are the most current versions in effect.

Business Commercial Industrial Structures – For Electrical Features Only

All markings must be permanent and visible after installation.

The QAI compliance label (item 1069) is normally located in close proximity to the electrical panel.

QAI logo shown here:

2. The specification nameplate (item 1068, 8-1/2” x 14” in size) is located in close proximity to the electrical panel and includes:
– Manufacturer’s Name and Address
– Date of Manufacture
– Model Serial Number or Product Code
– Factory Installed Appliances
– Site Installed Components, Assemblies, and Systems
– Electrical Systems Voltage, Frequency, and Amperage
3. Other Markings as required by the relevant codes.

Note 2: The QAI label and specification nameplate are available from QAI and must be applied at the factory.

The scope of Business Commercial Industrial Structures covered in this listing include:

Buildings:
Business Commercial Industrial Structures comprised of single modules complete with electrical wiring. Structures included in this listing typically include but are not limited to office space, stores, construction camp facilities such as washroom facilities, equipment buildings, and other similar commercial or industrial buildings.

Electrical Ratings:

Up to a maximum of 120/240V, 60Hz, 100A, single phase systems.
The structures for use in hazardous locations are not included in this report and QAI certification. This certification does not cover completion of sprinkler and fire alarm system. This report does not include services other than the electrical nor does it include vehicular lighting or brake wiring systems.
Buildings included in this listing are manufactured at a central facility and transported to the site. These modules include provisions for on-site interconnections and connection to electrical power supply. QAI certification covers any factory installed electrical services, equipment and fixtures. QAI certification is intended to obviate the necessity of further inspection by the local regulatory authorities except for site connections to services or to other modules and for site installed features.