Maison Usinex Inc
Factory Built Structures Listing Program
- Maison Usinex Inc
- Modular Homes
- Milan, Québec
- December 12, 2016
- February 14, 2020
CSA A277 “Procedure for Certification of Prefabricated Buildings, Modules, and Panels”
Quebec Construction Code, Chapter I – Building (NBC with Quebec amendments), Part 9
CSA C22.10 Quebec Construction Code, Chapter V – Electricity (Canadian Electrical Code, Part I, “Safety Standard for Electrical Installations” with Quebec amendments)
National Plumbing Code of Canada
Ontario Building Code, Part 9
Ontario Plumbing Code
Ontario Electrical Safety Code 2015 (Part 1) 23rd Edition
Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.
All markings must be permanent and visible after installation.
1. The QAI label (item 1067, black with gold, 3-1/2” diameter) is normally located in close proximity to the electrical panel and includes:
− Certification label serial number
− QAI certification logo with the “C” Identifier
− “Modular Homes”
QAI logo shown here:
2. The specification nameplate (item 1068, 8-1/2” x 14” size) is located in close proximity to the electrical panel and includes:
− Manufacturer’s Name and Address
− Date of Manufacture
− Model Serial Number or Product Code
− Foundation Type (Perimeter Foundation Wall or Piers)
− Floor live Load
− Specified Snow Load (1/50)
− Seismic Response Sa (0.2)
− Hourly Wind Pressure (1/50)
− Envelope Effective Thermal Resistance
− Windows/Doors/Skylights Thermal Characteristics
− Outside Design Temperature (Heal Loss or Heat Gain)
− Factory Installed Appliances
− Site Installed Components, Assemblies, and Systems
− Electrical Systems Voltage, Frequency, and Amperage
Other Markings as required by the relevant codes.
The QAI label and specification nameplate are available from QAI and must be applied at the factory.
Single or multi-family dwellings classified under one major occupancy (Group C – Residential), constructed in single or multiple modules up to a maximum of 3-storey configurations. Modular homes under this scope have a building area not exceeding 600m2.
Multi residential buildings are designed and constructed within the limitations of Part 9 with vertical fire and sound separations. This listing does not include multi-residential buildings requiring shared egress facilities, hotels and motels, and/or any buildings designed with multiple major occupancies.
For a full list of structures covered under Group C occupancy, please refer to Appendix A, Division B of the National Building Code.
Structural: Conventional Wood Frame Construction within the limitations of Part 9 of the National Building Code (with Quebec Amendments) and Part 9 of the Ontario Building Code
Electrical Ratings: 120/240V, 60Hz, 200A Max. Heating/Ventilation: Electric Baseboard Heaters. Modules may be equipped with ducting for installation of a central forced air furnace on site.
Plumbing: Conventional drainage and venting systems to a maximum of 240 hydraulic fixture units.
Gas Systems: None.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to email@example.com. Please include the listing number in the request.