Maisons Usinée Confort Design Inc.
Factory Built Structures Listing Program
- Maisons Usinée Confort Design Inc.
- Modular Homes
- Mascouche, Quebec
- April 26, 2017
CSA A277 “Procedure for Certification of Prefabricated Buildings,
Modules, and Panels”
National Building Code of Canada (Part 9), with Quebec
Amendments (Quebec Construction Code)
National Plumbing Code of Canada
C22.1-09 “Canadian Electrical Code, 2009 Part 1, with Quebec
Notes: Jurisdictions may require structures to comply with provincial /
municipal codes and lieu of the national codes.
Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.
All markings must be permanent and visible after installation.
1. The QAI label (item 1067, black with gold, 3-1/2” diameter) is normally in close proximity to the electrical panel
Certification label serial number
QAI certification logo with the “C” identifier
QAI logo shown here:
2. The specification nameplate (item 1068, white with black, 8-1/2” x 14” size) is located in close proximity to the electrical panel and includes:
Manufacturer’s Name and Address
Date of Manufacture
Model Serial Number or Product Code
Foundation Type (Perimeter Foundation Wall or Piers)
Floor live Load
Specified Snow Load (1/50)
Seismic Response Sa(0.2)
Hourly Wind Pressure (1/50)
Envelope Effective Thermal Resistance
Windows/Doors/Skylights Thermal Characteristics
Outside Design Temperature (Heal Loss or Heat Gain)
Factory Installed Appliances
Site Installed Components, Assemblies, and Systems
Electrical Systems Voltage, Frequency, and Amperage
3. Other markings are required by the relevant codes.
Note: the QAI label and specification nameplate are available from QAI
and must be applied at the factory.
The scope of structures covered by this listing include:
Single family dwellings classified under Group C – Residential,
constructed in single or multiple modules up to a maximum of 3-storey
configurations that may be installed on a permanent foundation. Modular
homes under this scope have a building area not exceeding 600 m2.
This listing does not include multi-residential units such as duplexes, row
houses, townhouses, motels and apartment buildings.
Conventional Wood Frame Construction within the limitations of Part 9 of
the National Building Code.
120/240V, 60Hz, 200A max.
Primarily Electrical Baseboard Heaters. Modular homes may be equipped
with air conditioning (electric only).
Conventional drainage and venting systems to a maximum of 240
hydraulic fixture units.
Modular Homes included in this listing are manufactured at a central facility and transported to the site. These modules, when completely assembled on site, are equipped with normal facilities for connection to municipal water, sewage, and electrical services. QAI certification covers the construction of the modular homes and any factory installed plumbing
and electrical services, equipment and fixtures. QAI certification is intended to obviate the necessity of further inspection by the local regulatory authorities except for site connections to services or to other modules and for site installed features.
Site installation of products must be done according to manufacturer’s installation instructions and in compliance with the requirements set by the local authority having jurisdiction.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to email@example.com. Please include the listing number in the request.