Modus Structures Inc.
Building Products Listing Program
- Modus Structures Inc.
- Thermal Insulation Panels
- Airdrie, Alberta
- B1038-2
- B1038-2
- August 15, 2016
- August 15, 2016
- N/A
-
CAN/ULC-S704-11 “Standard for Thermal Insulation, Polyurethane and Polyisocyanurate, Boards, Faced”
Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.
-
Polyisocyanurate Thermal Insulation Panels.
Manufactured in 5-1/2” and 6-1/2” thick panels. -
Product is marked with labels supplied by Modus Structures Inc. The label includes:
a) Manufacturer’s name
b) Product name
c) Date of manufacture
d) Address, including city and country of manufacture
e) QAI logo with ‘c’ identifier
f) QAI Listing number (B1038-2)
g) CAN/ULC-S704-11
Labels are applied to finished products to ensure visibility on the jobsite. -
The following outlines the performance of the Modus Structures Inc. polyisocyanurate insulation panels determined in accordance with the noted standards:
Property CAN/ULC-S704 Type 2 Requirement Thermal Resistance
Minimum at 25 mm
Thickness0.97 m2*oC/W Long Term Thermal
Resistance
Minimum
50 mm thick product1.80 m2*oC/W Water Vapour Permeance
at 25 mm Thickness
Class 3> 60 Ng/Pa*s*m2 Water Absorption
Maximum by volume3.5% Flexural Strength
Minimum275 kPa Tensile Strength
Minimum
Perpendicular to the
plane of the facer35 kPa Compressive Strength
Minimum140 kPa Dimensional Stability Maximum Condition Length Width At -29oC, ambient RH ± 2.0 ± 2.0 At 80oC, ambient RH ± 2.0 ± 2.0 At 70oC, 97% RH ± 2.0 ± 2.0 Dimension Tolerances Width, mm +4, -2 Length, mm +6, -4 Thickness, ≤ 55 mm thick +4, -1.5 Thickness, > 55 mm thick +5, -2.5 Flatness, mm < 4 Squareness (mm/m),
≤ 1200 mm in length< 5 Squareness (mm/m),
> 1200 mm in length< 9
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea