Reliance Worldwide Corporation DBA HoldRite
Plumbing Listing Program
- Reliance Worldwide Corporation DBA HoldRite
- Plastic Piping and Accessories
- 2400 7th Ave. SW, Cullman, AL 35055
- October 15, 2021
- October 15, 2021
ASTM E84 “Standard Test Method for Surface Burning Characteristics of Building Materials”.
CAN/ULC S102 “Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies”.
Polyvinyl Chloride (PVC) Fittings
All Testrite Tees shall be permanently marked with the following content applied to an area that is readily visible after installation:
a) Manufacturer’s name or trademark
b) Standard: ASTM E84, CAN/ULC S102
c) Flame Spread Rating ≤ 25, Smoke Developed Rating ≤ 50 (FSI ≤ 25 / SDI ≤ 50)
d) Nominal Size
e) QAI logo with ‘c’ and ‘us’ identifier
Testrite Tees Polyvinyl Chloride (PVC) Clean Outs
Rating(s): The following outlines the performance of the Testrite Tees determined in accordance with the noted standards.
ASTM E84 – Surface Burning Characteristics
Limitations Flame Spread Index Smoke Developed Index Maximum 6’’ nominal diameter Testrite Tees PVC cleanout installed with a minimum spacing of 8 ft between clean outs. Limited to 1 DWV pipe run per cavity. Testrite Tees limited for use with metallic pipe. < 25 < 50
CAN/ULC S102 – Surface Burning Characteristics
Limitations Flame Spread Index Smoke Developed Index Maximum 6’’ nominal diameter Testrite Tees PVC cleanout installed with a minimum spacing of 8 ft between clean outs. No limitation of DWV piping runs per cavity. Testrite Tees limited for use with metallic pipe. < 25 < 50
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to firstname.lastname@example.org. Please include the listing number in the request.