River City Woodworks Inc.
Windows & Doors Listing Program
- River City Woodworks Inc.
- Fenestration Products – Physical Performance
- Fernie, BC
- W493-1
- April 1, 2015
- April 1, 2015
- N/A
-
AAMA/WDMA/CSA 101/I.S.2/A440 NAFS “North American Fenestration Standard/Specification for windows, doors, and skylights”
CSA A440S1 “Canadian Supplement to the North American Fenestration Standard/Specification for windows, doors, and skylights”
-
Glass Inswing Door, Wood Inswing Door, Glass Outswing Door, Wood Outswing Door, Inswing SDS Door with Transom, Double Outswing Door, and Double Inswing Door.
- Each product is marked with the following content on a permanent label that is readily visible after installation:
- Manufacturer’s name, Trademark or other recognized symbol or identification
- QAI File number (W493)
- QAI-Verified logo
- “Evaluation for physical performance in accordance with AAMA/WDMA/CSA 101/I.S.2/A440 and CSA A440S1” •“Évalué pour la performance de physique en accord à la norme AAMA/WDMA/CSA 101/ I.S.2/ A440 et CSA A440S1”
- Each product is also marked with the additional following content on a temporary label that is readily visible after installation:
- Manufacturer’s name, Trademark or other recognized symbol or identification
- Manufacturer’s address
- Product description and configuration symbol
- Primary Designator in accordance with AAMA/WDMA/CSA 101/I.S.2/A440 and CSA A440S1
- Secondary Designator in accordance with AAMA/WDMA/CSA 101/I.S.2/A440 and CSA A440S1
-
Model Table:
ID Product Type Product Primary Designator Positive Design Pressure Negative Design Pressure Water Penetration Pressure Canadian Air Leakage* 1 Single_Inswing_Door Glass Inswing Door Class LC – PG45 – Size Tested 1256 x 2491mm Type SHD 2160 Pa -2160 Pa 330 Pa A3 Level 2 Single_Inswing_Door Wood Inswing Door Class LC – PG45 – Size Tested 1256 x 2491mm Type SHD 2160 Pa -2160 Pa 330 Pa A3 Level 3 Single_Outswing_Door Glass Outswing Door Class LC – PG50 – Size Tested 1256 x 2491mm Type SHD 2400 Pa -2400 Pa 360 Pa A3 Level 4 Single_Outswing_Door Wood Outswing Door Class LC – PG50 – Size Tested 1256 x 2491mm Type SHD 2400 Pa -2400 Pa 360 Pa A3 Level 5 SDS_Transom_Inswing_Door Inswing SDS Door with Transom Class LC – PG45 – Size Tested 2437 x 3047mm Type SHD 2160 Pa -2160 Pa 330 Pa A3 Level 6 Transom Transom Class LC – PG45: Size Tested 2437 x 555mm Type TR 2160 Pa -2160 Pa 330 Pa A3 Level 7 Sidelite Glazed Sidelite Class LC – PG45: Size Tested 590 x 2491mm Type SLT 2160 Pa -2160 Pa 330 Pa A3 Level 8 Sidelite Solid Panel Sidelite Class LC – PG45: Size Tested 590 x 2491mm Type SLT 2160 Pa -2160 Pa 330 Pa A3 Level 9 Mullion** Continuous Horizontal Mullion Class LC – PG45: Size Tested 2437mm span/2.08m² Type MA 2160 Pa -2160 Pa 330 Pa A3 Level 10 Mullion** Intersecting Vertical Mullion Class LC – PG45: Size Tested 2492 mm span/1.82m² Type MA 2160 Pa -2160 Pa 330 Pa A3 Level 11 DD_Outswing_Door Double Outswing Door Class LC – PG50 – Size Tested 1859 x 2492mm Type SHD 2400 Pa -2400 Pa 360 Pa A3 Level 12 DD_Inswing_Door Double Inswing Door Class LC – PG45 – Size Tested 1859 x 2492mm Type SHD 2160 Pa -2160 Pa 330 Pa A3 Level * Air leakage ratings are based on Canadian Air Infiltration/Exfiltration levels
** Mullions used in combination assemblies cannot exceed the listed span and tributary area, as described in the model table above. The tributary area is the area of wind-bearing load contributed to the mullion or divider, as described in AAMA 450. Please contact QAI for any assistance in calculating the tributary area.
Listed products in the Model Table above also qualify the following typical configurations as described in the following tables from AAMA/WDMA/CSA 101/I.S.2/A440-11 below. A qualified configuration must have identical framing member cross-sections and an equal or smaller gateway size than the listed product. The tables of qualified configurations below are not all-inclusive; other configurations are permitted at the evaluation of QAI.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea