Secure-Rite Structures Inc.
Factory Built Structures Listing Program
- Secure-Rite Structures Inc.
- Modular Homes, Group C – Residential
- Kelowna, BC
- August 15, 2022
- August 15, 2022
CSA A277-16 “Procedure for certification of prefabricated buildings, modules, and panels”,
British Columbia Building Code (Part 9),
British Columbia Plumbing Code, and
CSA C22.1 Canadian Electrical Code, Part 1
Note: Unless otherwise specified, the Codes/Standards noted are the most recent versions in effect.
Factory Built Modular Homes, Group C - Residential
1. QAI Label with the ‘c’ identifier (item 1067 – black with gold) is normally located in close proximity to the electrical panel.
a) Certification label wit serial number
b) QAI certification logo with the ‘c’ identifier
c) “Modular Homes”
d) QAI Logo shown here:
2. The Specification Nameplate (item 1068, white with black, 8-1/2” x 14”) is normally located on the inside of a cabinet door under the sink and includes:
a) Manufacturer’s Name and Address,
b) Date of Manufacture,
c) Product Serial Number or Product Code,
d) Foundation Type,
e) Floor Live Load,
f) Specified Snow Load (1/50),
g) Seismic Response Sa(0.2),
h) Hourly Wind Pressure (1/50),
i) Building Envelope Effective Thermal Resistance,
j) Windows/Doors/Skylights Thermal Characteristics,
k) Outside Design Temperature (Heat Loss/Heat Gain)
l) Factory Installed Appliances,
m) Site Installed Components, Assemblies, and Systems,
n) Electrical System Voltage, Frequency, and Amperage
Other Markings as required by the relevant Codes.
Note: The QAI Label and Specification Nameplate are available from QAI and must be applied at the Factory.
Modular Homes classified under a Single Major Occupancy – Group C, Residential. Buildings are constructed in single modules with single storey configuration and have a building are not exceeding 600 m2.
Modular Homes are designs and constructed as single dwelling units within the limitations of Part 9 of the Building Code. This listing does not include multiple suite, or multiple occupancy buildings, or any buildings that require fire and sound separations or shared egress facilities.
For a full list of structures covered under the above Occupancy Classification, please refer to Division B, Notes to Part 3, A-188.8.131.52.(1) Major Occupancy Classification in the National Building Code of Canada.
Steel shipping container modified as per P.Eng. design in Part 4 in a facility that is certified to CSA A660 and CSA W47.1. Building envelope is designed in Part 5 by P.Eng.
120/240V, 1PH, 60Hz, 100A Maximum
Conventional drainage and vent systems to a maximum of 240 Hydraulic Fixture Units.
Electric forced air wall heaters or baseboard heaters. Units are equipped with an ERV and may contain air conditioning.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to firstname.lastname@example.org. Please include the listing number in the request.