Superior Tray Systems Inc.
Electrical Listing Program
- Superior Tray Systems Inc.
- Cablebus
- Delta, BC, Canada
- E11086
- E11086-1901
- February 26, 2020
- March 19, 2021
- N/A
-
CSA C22.2 No. 273 Cablebus
-
Complete Cablebus System (Termination to Termination) and Associated Fittings
Permanently Connected, Ventilated, Class B
-
Products are marked in a permanent manner where it is readily visible after installation with the following:
a) Manufacturer’s name or trademark
b) Model designation
c) Month and year of manufacture
d) Product ratings: voltage, frequency, watts
e) QAI file Number: E11086
f) The wording “Conforms to CSA C22.2 No. 273”
g) Warning markings as required by the standards in English and Frenchh) QAI Logo
-
Products Max. Rating Max. Rating Short-Circuit Class Location Volts Amperes Amperes RMS Duration Amperes Peak Cablebus and associated fittings 46KV 5000A 80KArms 1 second 200KApeak B Wet/Dry Locations Note:
1- The Manufacturer / Listee maintains a system to ensure each product complies with this report prior to application of the QAI Mark.
2- The product is installed in accordance with the Canadian Electrical Code (CEC) as applicable.
3- For spans greater than 3.7 m (12 ft) and up to 6.1 m (20 ft), rungs forming cross pieces in the section shall be joined to the side rails by MIG (GMAW) welds on the inside and by TIG (GTAW) welds on the outside. For spans up to 3.7 m (12 ft), the rungs may be joined to the inside of the side rails by MIG (GMAW) welds only.Cautionary Markings:
1. WARNING! DO NOT USE AS A WALKWAY, LADDER, OR SUPPORT FOR PERSONNEL
AVERTISSEMENT! NE PAS UTILISER COMME PASSERELLE, ÉCHELLE OU SUPPORT POUR LE PERSONNEL
2. WARNING: IF THE CABLEBUS SYSTEM HAS BEEN EXPOSED TO A SHORT CIRCUIT SEE THE MANUFACTURERS INSTALLATION MANUAL FOR MAINTENANCE PROCEDURES BEFORE RE-ENERGIZING.
AVERTISSEMENT : SI LE RÉSEAU DE CONDUITS DE CABLES A ÉTÉ EXPOSÉ À UN COURT-CIRCUIT, CONSULTER LE MANUEL D’INSTALLATION DU MANUFACTURIER POUR OBTENIR LA PROCÉDURE À SUIVRE AVANT DE REMETTRE SOUS TENSION.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea