CSA A277 “Procedure for Certification of Prefabricated Buildings,
Modules, and Panels”
CSA C22.1-12 “Canadian Electrical Code, Part 1, Safety Standard for
Electrical Installations”
Alberta Building Code 2006 (Part 9 & 10)
National Building Code  2010 (Part 9)
National Plumbing Code 2010
CSA B149.1-10   “Natural Gas and Propane Installation Code”

Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.

Mobile Relocatable Commercial Industrial Structures

Products are labelled and marked in a permanent manner where it is
readily visible after installation with the following information:
1. The specification nameplate (item 1068, white with black, 8-1/2” x
14”) is located in close proximity to the electrical panel and
includes:
 Manufacturer’s Name and Address
 Date of Manufacture
 Model Serial Number or Product Code
 Foundation Type (Perimeter Foundation Wall or Piers)
 Floor live Load
 Specified Snow Load (1/50)
 Seismic Response Sa(0.2)
 Hourly Wind Pressure (1/50)
 Envelope Effective Thermal Resistance
 Windows/Doors/Skylights Thermal Characteristics
 Outside Design Temperature (Heal Loss or Heat Gain)
 Factory Installed Appliances
 Site Installed Components, Assemblies, and Systems
 Electrical Systems Voltage, Frequency, and Amperage

2. QAI label with ‘C’ identifier (Item 1093) – Relocatable
Commercial/Industrial Structures – Alberta Plumbing and Gas
Compliance Label (Alberta Part 10 Program)
3. QAI Label with ‘C’ identifier (Item 1094) – Relocatable
Commercial/Industrial Structures – Alberta Electrical Compliance
Label (Alberta Part 10 Program)
4. QAI Label with ‘C’ identifier (Item 1095) – Relocatable
Commercial/Industrial Structures – A277 Compliance Label

Commercial/Industrial Relocatable structures comprised of single or
multiple modules in single storey configurations. Structures are classified
under Group C (Residential Occupancies) with sleeping
accommodation have a building area not exceeding 600m2.
Commercial/Industrial Structures under this scope typically include
portable dormitories and industrial workforce housing accommodations.
This listing does not include office units, portable bathrooms, storage
units, dinning trailers, apartment buildings, hotels, motels, detention
facilities, dwelling units, multi-residential units requiring separation, and
other type of buildings for use in hazardous locations.
Structural:
Conventional Wood Frame Construction within the limitations of Part 9
Electrical Ratings:
120/240V, 60Hz, 200A Max.
Heating/Ventilation:
Central Forced Air Furnaces. Units may be electric, natural gas, or
propane fired. Systems may be equipped with air conditioning.
Plumbing:
Conventional drainage and venting systems up to a maximum of 240
hydraulic fixture units.