Warrior Roofing Manufacturing Inc.
Building Products Listing Program
- Warrior Roofing Manufacturing Inc.
- Roofing Underlayments
- Tuscaloosa, AL
https://warriorroofing - B1130-1
- B1130-1
- December 7, 2021
- No Revisions to Date
- N/A
-
ASTM D226 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing.
ASTM D4533/D4533M Standard Test Method for Trapezoid Terming Strength of Geotextiles.
ASTM D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method).
ASTM D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steel Slope Roofing
ASTM E108 Standard Test Methods for Fire Test of Roof Coverings. -
Elephant Skin Synthetic Underlayment Products.
-
Ratings: The following outlines physical properties of QAI certified Elephant Skin products:
PRODUCT TEST METHOD CLASSIFICATION ASTM D226/D226M1 Type II ASTM D4533/4533M
Tear StrengthMinimum 15 lbf ASTM D5035
Tensile StrengthMinimum 20 lbf/inch ASTM D4869/D4869M
Liquid Water TransmissionCompliant Note 1: ASTM D226/D226M outlines specifications for asphalt-impregnated organic felt materials. Elephant Skin high performance non-asphalt underlayment products in this table were tested and found to comply with the performance specifications outlined in ASTM D226 as an alternate to Type II.
The following outlines roof fire classifications of QAI certified Elephant Skin synthetic underlayment products:
Elephant Skin Synthetic Underlayment – Roof Fire Classifications (No Slope Limitations)
SHEATHING UNDERLAYMENT ROOF COVERING Minimum 15/32” Exposure 1 Plywood Elephant Skin
Minimum single layer mechanically fastened with overlaps per manufacturer’s
installation instructions.One layer of Class A listed* three-tab asphalt roof shingles, or equivalent, complying with ASTM D3018, and having a minimum installed weight of 180 pounds per 100 ft2 (9.28 kg/m2), installed per the manufacturer’s installation instructions. * Note 1: Asphalt Shingles are listed Class A components of a listed roof deck assembly by an Approved Agency. The third party program in which products are certified, carry a label, and are listed in the directory of an agency accredited by the International Accreditation Service, Inc. (IAS), or by an accredited body that is a partner with IAS in a mutual recognition arrangement, pertaining to certification bodies and their compliance with ISO/IEC Guide 65, General Requirements for Bodies Operating Product Certification Systems. The asphalt shingle components are to meet Class A Classification when tested to ASTM E108 or UL 790.
Notes:
The product must be installed in accordance with the code enforced by the authority having jurisdiction. Final acceptance of the product in the final installation is subject to inspection by the authority having jurisdiction.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.