Wespac International
Electrical Listing Program
- Wespac International
- Electrical Resistance Heating Devices Sets for use in Recreational Vehicles
- 311 NE 14th Avenue,
Fort Lauderdale, FL 33301
USA - E10543-1402
- E10543-1402 Edition 7 (QA-6265)
- March 25, 2014
- January 20, 2022
- N/A
-
CSA C22.2 No. 130 – Requirements for electrical resistance trace heating and heating device sets
-
Electrical Resistance Tank, Elbow and Pipe Heater Pads for use in Recreational Vehicles.
Dry Locations use and Permanently Connected. -
Products are marked in a permanent manner where it is readily visible after installation with the following:
a)Manufacturer’s name or trademark
b)Model designation
c)Month and year of manufacture
d)Product ratings: voltage and watts
e)QAI file Number: E10543
f)The statement “For Recreational Vehicle Use Only”
g)The statement “Surface Heating Device”
h)The statement “Component Only”
i)The statement “Conforms to CSA C22.2 No. 130”
j)Warning markings as required by the standards in English and Frenchk)QAI Logo
-
Model
Description
Voltage
V
Current
A
Power
W
Tank size (gallon)
Pad size
Foam Pad thickness
Lead wire length / AWG
SL-T1218G-16G
Tank Heater Pad with thermostat
13.5VDC
4.80A
65W
29-40 Gallon
12″x18″
3.0 mm
36″
16AWG
SL-T1218G-10G
Tank Heater Pad with thermostat
13.5VDC
4.80A
65W
29-40 Gallon
12″x18″
3.0 mm
36″
10AWG
SL-ST725G-16G
Step/Tank Heater Pad with thermostat
13.5VDC
5.80A
78W
29-40 Gallon
7¼”x25″
3.0 mm
36″
16AWG
SL-ST725G-10G
Step/Tank Heater Pad with thermostat
13.5VDC
5.80A
78W
29-40 Gallon
7¼”x25″
3.0 mm
36″
10AWG
SL-ST525G-16G
Step/Tank Heater Pad with thermostat
13.5VDC
5.80A
70W
29-40 Gallon
5¼”x25″
3.0 mm
36″
16AWG
SL-ST525G-10G
Step/Tank Heater Pad with thermostat
13.5VDC
5.80A
70W
29-40 Gallon
5¼”x25″
3.0 mm
36″
10AWG
SL-E38G-18G
Elbow Heater Pad for 1 ½” pipe
13.5VDC
0.30A
4W
—
3″x8″
3.0 mm
18″
18AWG
SL-E38G-10G
Elbow Heater Pad for 1 ½” pipe
13.5VDC
0.30A
4W
—
3″x8″
3.0 mm
18″
10AWG
SL-E313G-18G
Elbow Heater Pad for 3″ pipe
13.5VDC
0.62A
7.5W
—
3″x13″
3.0 mm
18″
18AWG
SL-E313G-10G
Elbow Heater Pad for 3″ pipe
13.5VDC
0.62A
7.5W
—
3″x13″
3.0 mm
18″
10AWG
SL-P618G-16G
Pipe Heater Pad for 1 ½” pipe
13.5VDC
1.80A
24W
—
6″x18″
3.0 mm
18″
16AWG
SL-P712G-16G
Pipe Heater Pad for 3″ pipe
13.5VDC
1.70A
23W
—
7.5″x12″
3.0 mm
18″
16AWG
Note: Devices included in this listing are for use in Recreational Vehicles only. Final acceptance of those devices in the recreational vehicle is subject to inspection by the Recreational Vehicle Certifier.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.






USA
Canada
Europe
China
S Korea