Duowei Union Group Co., Ltd.
Building Products Listing Program
- Duowei Union Group Co., Ltd.
- Insulated Metal Wall Panels
- Tiajin, China
- B1126-2
- B1126-1
- August 31, 2021
- N/A
- N/A
-
CAN/ULC S102 “Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies.”
CAN/ULC S126 “Standard Method of Test for Fire Spread Under Roof Deck Assemblies.”
CAN/ULC S101 “Standard Methods of Fire Endurance Tests of Building Construction and Materials”.
CAN/ULC S114 “Standard Method of Test for Determination of Non-Combustibility in Building Materials.” -
Duowei Rock & Glass Wool Sandwich Wall Panel Systems from 75 mm – 150 mm (3 inches – 5 inches) Thickness.
-
Each panel is marked with a permanent label containing the following information:
a) Manufacturer’s name or recognized trademark
b) Product name
c) Date of manufacture
d) QAI file number: B1126
e) CAN/ULC-S102 Flame Spread Index and Smoke Developed Index (FSI = 0 / SDI = 0)
f) CAN/ULC S114 Non-Combustible
g) QAI logo shown here:
-
The following outlines Duowei Rock & Glass Wool Sandwich Wall Panel System
performance determined in accordance with the noted standards. The ratings outlined in the tables below are achieved in assemblies that are defined in the QAI Design Listings.
Duowei Insulated Metal Panels Surface Burning Characteristics per CAN/ULC S102:Model(s) Flame Spread Index Max. Smoke Developed Index Max. Thickness Maximum Mineral Wool Core ≤ 25 ≤ 50 75 – 150 mm
3 – 6 inchesDuowei Insulated Metal Panels results of evaluated to CAN/ULC S126:
Model(s) Results Thickness Max. Mineral Wool Core Complies 75 – 150 mm
3 – 6 inchesDuowei Insulated Metal Panels results of evaluated to CAN/ULC S114:
Model(s) Results Thickness Max. Mineral Wool Core Non-Combustible 75 – 150 mm
3 – 6 inchesDuowei Insulated Metal Panels per CAN/ULC-S101 Non-Loadbearing Walls and Partitions
QAI Design Listing# Model: Fire Resistance Rating: B1126-1a1 Min. 100 mm (4 Inch) Mineral Wool Core Panels over steel studs, with 13 mm (1/2’’) exterior Type X gypsum sheathing and interior 16 mm (5/8’’) Type X gypsum wall board. 1-Hour Note 1: See design listing B1126-1a for installation details.
Duowei Insulated Metal Panels building envelope ratings determined with ASTM E283 and ASTM E331:
QAI Design # Thicknesses Air Leakage ASTM E283 L/s*m2 Water Penetration ASTM E331 @ 75 Pa @ 300 Pa @ 300 Pa @ 720 Pa B1126-1a1 75 – 150 mm
3 – 6 inches< 0.02 < 0.02 No Leaks No Leaks Note 1: See design listing B1126-1a for installation details.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI.
The standard herein listed is the currently accepted version within the relevant certification scheme, code or other requirements unless otherwise noted. Transition periods may apply. Upon request, QAI will provide information about the validity of any of its certifications.
No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing.
Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to info@qai.org. Please include the listing number in the request.
USA 
Canada 
Europe 
China 
S Korea