ModPro Containers Ltd.
Factory Built Structures Listing Program
- ModPro Containers Ltd.
- Mobile Relocatable Commercial Industrial Structures
- Abbottsford, BC
- February 23, 2015
- February 23, 2015
CSA A277-08 “Procedure for Certification of Prefabricated Buildings”
CSA C22.1-12 “Canadian Electrical Code, Part 1, Alberta Building Code 2006 (Part 9 & 10)
Alberta Building Code 2014
Note: Unless otherwise specified, the standards/Code noted are the most current versions in effect.
Mobile Relocatable Commercial Industrial Structures
Products are labelled and marked in a permanent manner where it is readily visible
after installation with the following information:
Item 1061 – Specification Nameplate (Black lettering on white background, 8-
1/2”x11”) is located in close proximity to the electrical panel board and includes:
– Manufacturer’s name and address
– Model and serial number
– Date of manufacture
– Fuel type
– Complete electrical rating
– A list of appliances that are factory installed
– Ground snow load and roof design snow load
– Thermal resistance of insulation and the outside design temperature
used in heat-loss calculations
– The building codes met by the building
– Additional markings as may be required
Item 1094 – QAI label with ‘c’ identifier:
“Relocatable Commercial/Industrial Structures – Alberta Electrical
Compliance Label (Alberta Part 10 Program)
Item 1095 – QAI label with ‘c’ identifier:
“Relocatable Commercial/Industrial Structures – CSA A277 Compliance
Commercial/Industrial relocatable structures comprised of single modules. The
frame of the structures is steel 8’x20’ or 8’x40’ containers. Structures are classified
under Group D occupancy in a single storey configuration without sprinkler
Commercial/Industrial structures under this scope typically include office space
and storage units. This listing does not include sleeping quarters, construction
camps, dining trailers, washcars, and other similar commercial or industrial
8’x20’ or 8’x40’ steel container units.
120/240V, 60Hz, 100A max.
Heating / Ventilation:
Units are equipped with electrical baseboard or forced air heating units.
Structures include in this listing are relocatable commercial/industrial structures
fabricated from 8’x20’ or 8’x40’ steel container units. All structural fabrication and
welding is performed by a fabrication shop certified to the CSA A660 for the scope
of work completed. These structures are manufactured at a central facility,
complete with electrical wiring for installation in the field. These structures, when
completely assembled on site, are equipped with normal facilities for connection to
electrical services. QAI certification covers the construction of the structures and
any factory installed electrical services, and is intended to obviate the necessity of
further inspection by the local regulatory authorities except for site connections to
services and for site mounting features.
The materials, products or systems listed in this directory have been qualified to bear the QAI Listing Mark under the conditions stated with each Listing. Only those products bearing the QAI Listing Mark are considered to be listed by QAI. No warrantee is expressed or implied, and no guarantee is provided that any jurisdictional authority will accept the Listing found herein. The appropriate authorities should be contacted regarding the acceptability of any given Listing. Visit the QAI Online Listing Directory located at www.qai.org for the most up to date version of this Listing and to validate that this QAI Listing is active. Questions regarding this listing may be directed to email@example.com. Please include the listing number in the request.